User manual HASBRO TRANSFORMERS ALTERNATORS SILVERSTREAK

[. . . ] Make sure that the instructions are kept with the appliance if it is sold, given away or moved. The appliance must be installed by a qualified professional in accordance with the instructions provided. Any necessary adjustment or maintenance must be performed after the cooker has been disconnected from the electricity supply. Room ventilation The appliance may only be installed in permanentlyventilated rooms, according to current national legislation. [. . . ] Turn the TIMER KNOB towards “+” and “-” to adjust the minute value. This function does not interrupt cooking and does not affect the oven; it is simply used to activate the buzzer when the set amount of time has elapsed. Press the and three numerical digits on the display start to flash. Turn the TIMER KNOB towards “+” and “-” to adjust the minute value. Press the The display will then show the time as it counts down. When this period of time has elapsed the buzzer will be activated. Before operating the product, remove all plastic film from the sides of the appliance. The first time you use your appliance, heat the empty oven with its door closed at its maximum temperature for at least half and hour. Ensure that the room is well ventilated before switching the oven off and opening the oven door. The appliance may emit a slightly unpleasant odour caused by protective substances used during the manufacturing process burning away. Select the desired cooking mode by turning the SELECTOR knob. Press the on the DISPLAY begin to flash. Turn the TIMER KNOB towards “+” and “-” to adjust the minute value. When the set time has elapsed, the text END appears on the DISPLAY, the oven will stop cooking and a buzzer sounds. And a time of 1 hour and 15 minutes is programmed and the end time is set to 12:30. And Programming has been set when the buttons are illuminated. The DISPLAY shows the cooking end time and the cooking duration alternately. To cancel programming, turn the SELECTOR knob to the “0” position. GB PROVING mode The oven reaches and maintains a temperature of 40°C irrespective of the position of the THERMOSTAT knob. This mode is ideal for leavening dough made with yeast. FAST COOKING mode Preheating is not necessary for this cooking mode. This mode is particularly suitable for cooking prepacked food quickly (frozen or pre-cooked). [. . . ] Inspecting the oven seals Check the door seals around the oven regularly. If the seals are damaged, please contact your nearest Authorised After-sales Service Centre. We recommend that the oven is not used until the seals have been replaced. Never use steam cleaners or pressure cleaners on the appliance. [. . . ]