User manual HASBRO TYKE BIKE 1998087

[. . . ]  If the appliance is levelled correctly, it will be more stable and much less likely to cause vibrations and noise while it is operating, particularly during the spin cycle.  If it is placed on carpet or a rug, adjust the feet in such a way as to allow a sufficient ventilation space underneath the washing machine. Connecting the electricity and water supplies Connecting the water inlet hose  Before connecting the inlet hose to the water supply, run the water until it is perfectly clear. Connect the inlet hose to the machine by screwing it onto the cold water inlet of the appliance, which is situated on the top righthand side of the rear part of the appliance (see figure). [. . . ] To set the "delayed start" option for the program you have selected, press the button until the indicator light for the desired delay time is illuminated. The sixth time the button is pressed, the function will be disabled. : once the START/PAUSE button is pressed the "delayed start" indicator light will flash (the time delay value may only be changed by decreasing the time). Press the OPTION buttons to customise the wash cycle in accordance with your own requirements. • Press the button to activate the option; the corresponding indicator light will switch on. • Press the button again to disable the option; the indicator light will switch off.  If the selected option is not compatible with the selected wash cycle, this incompatibility will be signalled by the flashing of the indicator light and a sound alert (3 beeps); the option will not be activated.  If the selected option is not compatible with another option that has been selected previously, the indicator light corresponding to the first option selected will flash and only the second option will be activated; the indicator light corresponding to the button will remain lit in a constant manner. The corresponding indicator light remains lit in a fixed manner and the porthole door locks (the DOOR LOCKED indicator light illuminates). The icons corresponding to the wash cycle phases will light up during the cycle to indicate which phase is currently in progress. To change a wash cycle once it has already started, pause the washing machine by pressing the START/ PAUSE button; then select the desired cycle and press the START/PAUSE button again. Preparing the laundry • Shake out the garments before loading them into the machine. • Divide the laundry according fabric type (symbol on the washing instruction label) and colour, making sure you separate the coloured garments from the white ones; • Empty all pockets and check the buttons; • Do not exceed the values listed in the “Table of wash cycles”, which refer to the weight of the laundry when dry. The machine will slowly rotate the drum; to end the cycle press the START/PAUSE button. Silk: use the special “Silk” wash cycle to wash all silk garments. We recommend the use of special detergent which has been designed to wash delicate clothes. fold curtains and place them in a pillow case or mesh bag. Wool: Hotpoint/Ariston is the only washing machine brand to have been awarded the prestigious Woolmark Platinum Care endorsement (M. 0508) by the Woolmark Company, which means that all woollen garments may be washed in the washing machine, even those which state “hand wash only” on the label. The “Wool” wash cycle can be used to wash all woollen garments in the washing machine while guaranteeing optimum performance. Quilted Jacket: to wash quilted jacket, cushions or clothes padded with goose down (the weight of which should not exceed 1 kg), use the special “Quilted Jacket” wash cycle. Bedlinen and towels: use the “Bed & Bath” cycle to wash laundry from all over the house; this optimises fabric softener performance and helps you save time and energy. [. . . ] • • • The door is not closed properly. The START/PAUSE button has not been pressed. The washing machine does not fill • The water inlet hose is not connected to the tap. • If you have selected the “Baby ” cycle or the “Easy iron ” option, when the wash cycle has finished the machine will slowly rotate the drum; to end the cycle press the START/PAUSE button or the “Easy iron ” button. [. . . ]