User manual HASBRO WATER WORLD-TRIMARN

[. . . ] Connecting it to any other kind of outlet may damage the machine. · Do not install or use the machine near water, or when you are wet. Take care not to spill any liquids on the machine. · Unplug the machine from the power outlet and telephone socket and consult a qualified service representative if any of the following situations occur: - Liquid has been spilled into the machine or the machine has been exposed to rain or water. - The machine produces odors, smoke, or unusual noises. - The machine has been dropped or the housing damaged. · Do not allow anything to rest on the power cord, and do not install the machine where people may walk on the power cord. · Never insert objects of any kind into slots or openings on the machine. [. . . ] Note that the speaker will be automatically activated when you press the REDIAL. 53 3. Sending Documents Sending a Fax by Automatic Dialing Sending a Fax by Automatic Dialling You can dial a fax or telephone number by simply pressing a Rapid Key, or by pressing the SPEED DIAL key and entering a 2-digit number. To use Automatic Dialling, you must first store the full fax or telephone number in your fax machine. When you store a fax or telephone number, you select a 2-digit Speed Dial number for it. 30 Speed Dial numbers(UX-51:20) are available. Speed Dial numbers 01 through 10 are for Rapid Key (one-touch) Dialling. 01 Speed Dial numbers 11 through 30(UX-51:11 through 20) are for dialling with the SPEED DIAL key. SPEED DIAL START/MEMORY 1 1 SPEED DIAL key Attach each strip of Rapid Key labels between the Rapid Keys. When you store a number in a Rapid Key, write the name of the party on the label. Rapid keys 54 Sending a Fax by Automatic Dialing Storing fax and telephone numbers for Automatic Dialling 1 Press these keys: FUNCTION 3 FAX/TEL. NUMMERN The display will show: The display will show: FAX/TEL. EING. 3 Enter a two-digit Speed Dial number by pressing the number keys (01 to 10 for Rapid Key Dialling, 11 to 30 for Speed Dialling). 0 1 (Example) 4 Enter the fax or voice number by pressing the number keys (max. (Note: A space cannot be entered. ) · Press the SPEED DIAL key to clear a mistake. · If a pause is required between any of the digits to access a special service or an outside line, press the REDIAL key. · If you are on a PBX, do not enter the access code for the public line. You can use this method to dial a full number when you don't need to speak to the other party before faxing. Note: Direct Keypad Dialling cannot be used to dial a number within the same PBX as your fax machine. To send a document to a fax machine in your PBX, use Normal Dialling. 1 Load the document(s). The display will show: SENDEBEREIT · Set the resolution and/or contrast if desired. RESOLUTION 2 Enter the number of the receiving machine by pressing the numeric keys. · If a pause is required between any of the digits to access a special service or an outside line, press the REDIAL key. Several pauses can be entered in a row. ABC DEF 1 GHI 2 JKL 3 MNO 4 PQRS 5 TUV 6 WXYZ 7 8 9 3 Check the display. If the number of the receiving machine shown is correct, press the START/MEMORY key. · If it is not correct, press the STOP key to backspace and clear one digit at a time, and then re-enter the correct digit(s). START/MEMORY 60 Sending a Fax by Automatic Dialing Using the SEARCH/R key If you don't remember the Rapid Key or Speed Dial number in which you have stored a particular fax number, you can search for the number by following the steps below. Once you have found the number, you can dial it and transmit the loaded document by simply pressing the START/MEMORY key. 1 Load the document(s). Sending Documents RESOLUTION · Set the resolution and/or contrast if desired. 2 Press the SEARCH/R key. SEARCH R 3 Enter the first letter of the stored name by pressing the appropriate number key (the key which corresponds to the required letter) one or more times until the letter appears in the display. If the name begins with a special character or number, press 1. [. . . ] because a general outgoing message has not been recorded. To record a general outgoing message, see Recording an outgoing message in Chapter 2. PAPIERSTAU SENDEBEREIT WAHL WDH. TEL. SUCHEN _ SEITEN GESAMT OGM NOT RECORDED Audible signals Continuous tone 1 seconds Indicates the end of transmission, reception, or copying. Indicates incomplete transmission, reception, or copying. [. . . ]