User manual HASBRO WCW NITRO HOLLYWOOD HOGAN

[. . . ] TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPARATUS TO DRIPPING OR SPLASHING, NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHOULD BE PLACED ON THE APPARATUS. Laser Diode Properties Material: GaAs Wave length: DVD: 655 nm CD: 790 nm Emission Duration: Continuous Laser output: Max. 0. 8 mW Power Cord Protection To avoid any malfunctions of the VCR/DVD, and to protect against electric shock, fire or personal injury, please observe the following. · Hold the plug firmly when connecting or disconnecting the AC power cord. [. . . ] 8 Press TIMER ON/OFF to activate the timer. The TIMER indicator on the VCR/DVD comes on. PDC (Programme Delivery Control) The Programme Delivery Control (PDC) is a very convenient system which assures that the TV programmes you have programmed for timer recording, will be recorded exactly from beginning to end, even if the actual broadcasting time differs from the scheduled time due to delayed start or extension of the programme duration. Also, if a programme is interrupted and, for example, some special news is broadcast, the recording will also be interrupted automatically and resumed when the programme continues. When the PDC signal drop out because the broadcast signal is weak, or when a broadcasting station does not transmit a regular PDC signal, the timer recording will be performed in the normal mode (without PDC) even if it was programmed for PDC. When the starting time of the PDC timer recording is from 0:00 to 3:59 on a given day, the PDC function operates from 20:00 on the previous day to 4:00 on the following day. When the starting time of the PDC timer recording is from 4:00 to 23:59 on the given day, the PDC function operates from 0:00 on the day to 4:00 on the following day. This means that if the relevant programme is broadcasted within this period, it will be recorded correctly. If the timer is not programmed correctly, the incorrect timer setting stays in effect unless you cancel it. To cancel the incorrect timer setting, refer to "To Cancel or Check the start/end Time" on page 16. Quick-Find This function enables you to search and confirm the contents of the recorded programme(s) using the index mark. · The tape must be fully rewound. To skip to the beginning of next programme Press QUICK-FIND. NOTES: · This function will not operate in the Recording mode. · When you want to cancel the Quick-Find while in progress, press STOP. · Operations must be followed up within 30 seconds, from steps 2 to 3 . Otherwise the Time Search mode will be cancelled. · To exit the Time Search mode, press MENU in step 2 . 3 Press TAPE SPEED to select the desired recording speed (SP/LP). 4 Select "AV2" or "AV3" position on the recording VCR/DVD. 5 Press REC/OTR on the recording VCR/DVD. 6 Begin playback of the tape in the playback VCR. 7 To stop recording, press STOP/EJECT on the recording VCR/DVD, then stop playback of the tape in the playing VCR. NOTES: · For best results during dubbing, use the VCR/DVD's front panel controls whenever possible. The remote control might affect the playback VCR's operation. · If video or colour fades in and out, you may be copying a copy guarded video tape. [. . . ] The VCR does not perform a timer recording. The motor rotates even when tape playback is stopped. You cannot insert a tape. You cannot remove a tape. NOTES: · Some functions are not available in specific modes, but this is not a malfunction. Read the description in this Operation Manual for details on correct operations. · Playback from a desired track and random playback are not available during programme playback. [. . . ]