User manual HASBRO WEAKEST LINK GAME

[. . . ] Parts and equipment mentioned in this operation manual other than those detailed above are not included. The AC adaptor may be different from the one in the drawing. Optional Accessories !Connection cable (for digital recording) (AD-M2DC) 2 02/12/18 MD_MT290H_UK_1. fm Contents " Important Introduction Page WEAKEST LINK GAME " Useful Features Page Special Notes . 4 - 5 Names of Controls and Indicators . [. . . ] When recording is paused or whilst recording. . . 1 2 3 4 5 Press the MENU/ENTER button. Press the or button repeatedly to select "MARK". or button to select "MARK Useful Features -Advanced Recording- Press the MENU/ENTER button. Notes: " Complete the operation within 7 seconds whilst selecting the menus. " When making digital recordings using a CD player or an MiniDisc player, track numbers will be created automatically regardless of the setting of the auto marker function. 26 02/12/18 MD_MT290H_UK_4. fm WEAKEST LINK GAME !Track numbers are created automatically during recording via the analogue connection when a silence of 1 second or more is detected (auto marker function). A series of tracks can be recorded as one by disabling the auto marker function (see page 26). " When recording, if a programmed playback is performed by the source or playback is performed by selecting tracks manually, the MiniDisc track numbers may not be the same as on the source. " Track numbers may not be created properly, depending on the connected stereo system. Useful Features First track Second track !When recording from a CD or a MiniDisc using the digital connection, track numbers will be created at the same points as on the CD or MiniDisc (synchro marker function). You cannot copy a MiniDisc that you recorded from digital inputs to another MiniDisc or DAT. It is prevented by the SCMS (Serial Copy Management System). Recording from analogue inputs is not affected. Digital signals Digitally recorded MiniDisc Cannot record Playback side Recording side First track Track A First track Track A Second track Third track Track B Track C Second track Third track Track C Track B -Advanced Recording- About 1 second Silence !When a sound, such as person speaking, is picked up by the microphone, recording will begin automatically. 29 02/12/18 MD_MT290H_UK_4. fm WEAKEST LINK GAME Recording from a Microphone (continued) !Track intervals When recording from the microphone, track numbers will be created automatically at regular intervals (default setting: approximately every 5 minutes). During a mic synchro recording, the unit pauses when a silence lasts for 3 seconds or more, and creates a track number. 5 6 Press the MENU/ENTER button. The mode will be set automatically after 7 seconds even if the MENU/ENTER button is not pressed. Track numbers will be created automatically at regular intervals. -Recording from a Microphone- Changing intervals between tracks Example: Set to "5 minutes". Useful Features 1 2 3 4 Press the MENU/ENTER button. Press the or button repeatedly to select "MARK". Press the or button. During a mic manual recording Timed auto marks will be created every 5 minutes. Track number 1 5 minutes Track number 2 5 minutes Track number 3 5 minutes Track number 4 During a mic synchro recording (No automatic track numbers are created. ) (A new track number is created every 3 minutes. ) If a silence lasts for 3 seconds or more, a timed auto mark will be created 5 minutes after the previous mark is created. : Track number which is created by the timed auto mark function. : Track number which is created when a silence lasts for 3 seconds or more during synchro recording. (A new track number is created every 5 minutes. ) (A new track number is created every 10 minutes. ) Track Track number 1 number 2 2 minutes 5 minutes Track Track number 3 number 4 1 minute 5 minutes Track number 5 The interval between marks may vary slightly compared with the actual recording time. Creating track numbers manually " Press the REC button whilst recording. " The BASS button on the remote control can also be used to add track numbers. 30 02/12/18 MD_MT290H_UK_4. fm Changing Default Settings Whilst in the stop mode . . . WEAKEST LINK GAME !Beep sound You can eliminate the confirmation sound that beeps when you press a button. 1 2 3 4 5 With a MiniDisc inserted, press the MENU/ ENTER button for 2 seconds or more. "SET UP" will appear. When you release the button, "BEEP" will flash. !Auto play You can make the unit not play automatically when you insert a playback-only MiniDisc or an accidental erasure protected MiniDisc. When the unit is used in a place exposed to much vibration, sound skipping can be decreased by cancelling the auto power save function. [. . . ] The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units. Power source: DC 1. 2 V: DC 5 V: DC 1. 5 V: DC 4. 5 V: Rechargeable Nickel-Metal Hydride Battery (AD-N70BT) x 1 AC adaptor (AC 230 V, 50/60 Hz) Commercially available, "AA" size (LR6), alkaline battery x 1 Optional car adaptor, AD-CA20X (for cars with a 12 - 24 V DC negative earth electrical system) References Power consumption: Output power: Charging time: Dimensions: Weight: Input socket: Output socket: Type: Signal readout: Audio channels: Frequency response: Rotation speed: Error correction: Coding: Recording method: Sampling frequency: Wow and flutter: 7 W (AC adaptor) RMS: 20 mW (10 mW + 10 mW) (0. 2 % T. H. D. ) Approx. 5. 5 hours (fully charged)(When using the AC adaptor included with the unit) Width: 83 mm (3-9/32") Height: 28 mm (1-1/8") Depth: 77 mm (3-1/32") 134 g (0. 30 lbs. ) with rechargeable battery Line/optical digital, microphone (powered by the main unit) Earphones (impedance: 32 ohms)/remote control unit Portable MiniDisc recorder Non-contact, 3-beam semiconductor laser pickup Stereo 2 channels/monaural 1 channel 20 - 20, 000 Hz ( 3 dB) Approx. [. . . ]