User manual HASBRO WINNIE THE POOH

[. . . ] Do not install the copier in a humid or dusty location. When the copier is not used for a long time, for example, during prolonged holidays, turn the power switch off and remove the power cord from the outlet. When moving the copier, be sure to turn the power switch off and remove the power cord from the outlet. Do not cover the copier with a dust cover, cloth or plastic film while the power is on. [. . . ] Enables or disables image rotation (180°) of the front side in one-sided to two-sided copying or two-sided to one-sided copying. Selects the location of the expanded margin. See page 71. 7 8 GENERAL INFORMATION 9 10 11 12 13 User programs 14 15 16 17 18 19 20 22 * These programs do not affect the copier functions unless certain optional equipment is installed. 36 USER PROGRAMS Setting the user programs 1 Press and hold the light ( ) key for more than 5 seconds until all the alarm indicators ( , , , , and ) blink and "­ ­" appears in the copy quantity display. 2 Enter a program number using the numeric keys. G G G The selected program number will blink in the copy quantity display. If a mistake is made in steps 2 to 4, press the CLEAR key. The program numbers are shown in the table below. For example, to change the setting of the auto power shut-off timer, press key 3. Program name Auto clear time Preheat mode Auto power shut-off timer Stream feeding mode Auto power shut-off setting Border line for 2 in 1 or 4 in 1 Rotation copy Auto paper select mode Auto tray switching Auditing mode Account number entry Account number change Account number deletion Number of copies per account Resetting account Erase width adjustment Layout in 2 in 1 copy Layout in 4 in 1 copy Offset of paper output tray Image rotation in duplex copying Location of the margin Program No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 22 GENERAL INFORMATION For operation of these programs after step 3, see page 39. User programs 3 Press the START key. G For programs 1 to 9 and 16 to 22, the entered program number will be steadily lit on the left side of the copy quantity display and the currently selected parameter number for the program will blink on the right side. For programs 10 to 15 (programs for auditing accounts), the display varies with the program number. See page 39 for setting programs 10 to 15. G 37 USER PROGRAMS 4 Select the desired parameter using the numeric keys. G The entered parameter number will blink on the right side of the copy quantity display. The parameters are shown in the table below. G If no account number has been registered, "12E" will appear in the copy quantity display. The copier will return to step 2 on page 37. 1. Use the copy ratio display ( number to be changed. G ) key to select the account Use the key to advance through the account numbers. 2. Press the START key. G The account number will be erased and "­­­ " will blink in the copy quantity display. 3. 4. Enter a new account number using the numeric keys. Press the START key. G If a number that is already registered or "000" is entered, the number will blink in the copy quantity display. 5. 6. Repeat steps 1 to 4 for other account numbers. To continue with other user programs, press the key and enter another program number. To exit the user program mode, press the light ( ) key. Program No. 13: Account number deletion Program No. 13 is entered, "0" will blink on the right side of the copy quantity display. G If no account number has been registered, "13E" will appear in the copy quantity display. The copier will return to step 2 on page 37. GENERAL INFORMATION 1. [. . . ] Signs and Symptoms of Exposure: Minimal irritation to respiratory tract may occur as with exposure to any non-toxic dust. Medical Conditions Generally Aggravated by Exposure: None Emergency and First Aid Procedures: Inhalation; Remove to fresh air. If effects occur, consult medical personnel. Eye; In case of contact, immediately flush eyes with water for 15 minutes. Route(s) of Entry: 79 Section 6. Physical Chemical Characteristics Not applicable Not applicable Not applicable Not applicable Fine powder Odorless Specific Gravity: Solubility in Water: PH: Viscosity: Color: about 7. 3 Negligible Not applicable Not applicable Black Boiling / Melting Point: Vapor Pressure: Vapor Density: Evaporation Rate: Appearance: Odor: Section 7. Fire and Explosion Data Not applicable >350°C (LEL); Not applicable (UEL); Not applicable CO2, dry chemical, foam or water None This material has no unusual fire or explosion hazards. [. . . ]