User manual HASBRO WONDER WORLD ENDLESS SUMMER

[. . . ] All information included herein is subject to change without notice. HASBRO is not responsible for any loss or damages, direct or indirect, arising from or related to the use of this operation manual. © Copyright HASBRO Corporation 2003. Reproduction, adaptation or translation without prior written permission is prohibited, except as allowed under copyright laws. Trademark Acknowledgments Microsoft Windows, MS-DOS, and Windows NT are trademarks of Microsoft Corporation in the U. S. A. [. . . ] Account numbers for this purpose are programmed as explained in the Key Operator's Guide in the "PRINTER UTILITIES" CD-ROM. When the "ACCOUNT LIMIT" key operator program is enabled, printing is not permitted after the page count reaches the limit. When this happens, a notice page is printed (unless the "Disable notice page printing" key operator program has been enabled). When the "NO PRINT IF ACC'T # INVALID" key operator program is enabled, printing will not take place if an invalid account number is entered, or if printing is executed without entering an account number. If you want printing be allowed even if a valid account number is not entered, disable this setting. In this case, pages printed by an invalid account number will be included in the "OTHERS" count. Default Job ID Use this setting to select the default user name and job name that appear in the machine's operation panel. Note that if "Always Use This ID" is not selected, the Windows login name and the job name set in the application will be automatically used. The names that appear here will also appear in the dialog box that appears when printing is executed. [User Name] Use this setting to select the default "User Name" that appears in the machine's operation panel. If "Always Use This ID" is selected, the name entered here will appear in the machine's operation panel. If "Always Use This ID" is not selected, the Windows login name will be automatically used. When [Auto Select] is selected, the tray containing the paper specified in [Paper Size] and [Paper Type] is automatically used. If a setting other than [Auto Select] is selected, paper will be drawn from the selected source regardless of the [Paper Size] and [Paper Type] settings. Default setting: Auto Select [Paper Type] Set the paper type. It is also necessary to set the paper type at the operation panel on the machine. Default setting: Auto Select [Tray Status] Click this button to display the paper size, paper type, and paper remaining in the machine's paper trays. This function operates when the "Printer Status Monitor" is running in the user's PC and the printer is used on a network. Output This sets the exit tray for the printed output. This setting cannot be selected when the staple function is turned on. Default setting: Center Tray Different Paper Click this button if you wish to include a cover sheet with the print job. A window will appear to allow you to select the paper tray for the cover sheet. Transparency Inserts Click this button if you wish to insert a different type of paper between each page of the print job. [. . . ] Does a checkmark appear in the [Punch] Click the [Punch] checkbox so that a checkmark checkbox in the Main tab?Punching is not possible when different paper sizes are mixed together. Paper is badly curled and the output paper is Differences in paper quality and type may result in bad not punched. Take the paper out of the tray or bypass tray, turn it around, and reload it so that the top and bottom edges are reversed. [. . . ]