User manual HASBRO WOODEN SHIPS AND IRON MEN

[. . . ] 36 · CALLING UP A STORED DESTINATION . 37 · CHECKING AND DELETING ENTERED DESTINATIONS . 38 · DISPLAYING ONLY FAX OR GROUP DESTINATIONS . 40 CALLING UP A DESTINATION FROM A GLOBAL ADDRESS BOOK. [. . . ] (3) Touch the [To] key. Auto Sub Address Special Modes File Quick File (1) CALLING UP A FAX NUMBER FROM THE ADDRESS BOOK (page 36) If the fax number of the transmitting machine is not stored in the Address Book, enter the fax number with the numeric keys. ENTERING A FAX NUMBER WITH THE NUMERIC KEYS (page 35) 6 (3) To AAA AAA CCC CCC EEE EEE Frequent Use ABCD Cc (2) Condition Settings BBB BBB DDD DDD FFF FFF EFGHI JKLMN OPQRST UVWXYZ 1/1 Address Review Global Sub Address Sort Address You can touch the key to display a list of the selected special mode settings or two-sided scanning. To return to the previous screen after checking the settings, touch the [OK] key. Press the [BLACK & WHITE START] key ( ). Scanning begins. · If you inserted the original pages in the document feeder tray, all pages are scanned. A beep will sound to indicate that scanning is finished. · If you are scanning the original on the document glass, scan each page one page at a time. When scanning finishes, place the next original and press the [BLACK & WHITE START] key ( ). Repeat until all pages have been scanned and then press the [Read-End] key. A beep will sound to indicate that scanning is finished. Press the [STOP] key ( 7 ). · The 2in1 function cannot be used when the original is other than A4, B5 and A5 (8-1/2" x 11" and 5-1/2" x 8-1/2") size. · This function cannot be used in combination with the following functions: Dual Page Scan, Card Shot, Mixed Size Original To cancel 2in1. . . (1) The same documents are faxed to each branch office (2) To save paper, two document pages are faxed as a single page (3) Smudges on the edges of the documents are erased before transmission 8-1/2" x 11" (A4) size documents to be distributed Fax received by recipients. 1 2 1 2 1 2 When a job program is not stored Enter the fax numbers of the branch offices When a job program is stored Call up the stored program. Select the 2in1 function. Select erase settings Press the [BLACK & WHITE START] key. The originals are scanned and transmitted. Press the [BLACK & WHITE START] key. The originals are scanned and transmitted. Considerable time is required to send the documents each month because the above settings must be selected. In addition, mistakes may occasionally be made when selecting the settings, so incorrect transmissions may occur. When a program is stored, settings are selected with ease by simply pressing the stored key. In addition, transmission takes place based on the stored settings so there are no chances for mistakes. 81 · Programs are stored, edited, and deleted using "Address Control" in the System Settings for fax. Storing a Program (page 145) · The following settings can be stored in program. Destinations: One-touch keys, group keys, search numbers Original settings: Resolution and exposure settings Special modes: Polling reception, Erase, Dual Page Scan, 2in1 F-code communication: A destination that includes an F-code can be stored to perform an F-code operation. · The following settings cannot be stored in programs. These settings and functions can be selected before transmission. [. . . ] Touch the [Enable/Disable Settings] key and configure the settings. The Enable/Disable Settings control the same parameters as other settings such as the Printer Condition Settings. The settings are linked together (changing one setting changes the other). Image Send Settings Disable Switching of Display Order This is used to prohibit changes to the order of display (order search number, ascending, descending) in the Address Book. When this setting is enabled, touching a tab on the Address Book screen does not change the order. The currently selected display order will be the order that is used after the setting is selected. [. . . ]