User manual HASBRO WWF SUPER STARS WATCH WITH ALARM

[. . . ] 8 Notice for Users in Australia . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Tips and safety precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Product description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Height adjustment, angle adjustment, rotation (long height/width) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Connecting the monitor and turning the monitor on and off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Connecting the monitor to a computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Connecting the monitor to a power source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Connecting a USB device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Turning the power on . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] 18) If your system is not Windows, you can not use the Adjustment Pattern. Therefore display an image that makes the entire screen light and adjust it through checking visually its actual tone. This chapter provides the procedure how to adjust the screen by using Adjustment Pattern (for Windows) MANUAL: Individual menu options are manually adjusted. AUTO: Every menu option is automatically adjusted. Notes: - Press the button to select [AUTO]. - To choose a menu option:SELECT button - To go to the next menu: MENU button CLOCK The figure below demonstrates how to adjust so that buttons) vertical flicker noise is not emitted. The ADJUSTMENT Menu will be displayed. At this point relevant menu options can be adjusted. Each time the MENU button is pressed the next menu is selected. (ADJUSTMENT GAIN CONTROL COLOR CONTROL MODE SELECT OSD Menu disappears) Notes: - The OSD Menu automatically disappears approximately 30 seconds after the last command. Vertical flicker noise PHASE The figure below demonstrates how to adjust so that buttons) horizontal flicker noise is not emitted. ( Note: - Adjustments to PHASE should be made only after CLOCK has been correctly set. Horizontal flicker noise H-POS (horizontal positioning) and V-POS (vertical positioning) To center the screen image within the boundaries of the screen, adjust the left-right (H-POS) values and buttons) the up-down (V-POS) values. ( Screen frame 19 English Adjusting the screen display (With analog connection) Adjusting the screen display (With analog connection) GAIN CONTROL Menu COLOR CONTROL Menu MANUAL: Individual menu options are manually adjusted. Color tone slightly bluer than standard STD . . . . . . Color tone standard setting · . . . . . . . . . Color tone slightly redder than standard WARM . . Color tone redder than standard USER R-CONTRAST . . . . button for blue-green button for red G-CONTRAST . . . . button for purple button for green B-CONTRAST . . . . button for yellow button for blue GAMMA Adjust so that dark and bright images are easy to see. If the screen is dark and hard to see, increase the numerical value. If it is bright and hard to see, buttons) lower the numerical value. ( MODE SELECT Menu Notes: - Depending on the resolution of the input signal, even if menu options can be selected, the display may not change. - To choose a menu option: SELECT button - When adjustment complete: MENU button OSD H-POSITION (OSD horizontal position) The position of the OSD display can be moved to the buttons) left and right. [. . . ] - Once having removed the screws, store them together with the stand and if the stand is ever reattached be sure to use the original screws. Using different screws could lead to a malfunction. Parts may spring out and cause injury. Arms or stands able to be used Attachments must satisfy the following. - Compatible with the VESA standard - Have a gap of 100 mm x 100 mm between the screw holes on the section to be attached - Not be likely to fall off or break off after being attached to the monitor. How to attach the arm or stand Be careful not to overly bend the cable or add extension cords as this could lead to malfunction. [. . . ]