User manual HASBRO XEVOZ IRON SPECTRE UNNATURAL

[. . . ] Do not make copies of anything which is prohibited from copying by law. The following items are normally prohibited from copying by national law. Other items may be prohibited by local law. Money Stamps Bonds Stocks Bank drafts Checks Passports Driver's licenses CONTENTS CAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Adjust the exposure and press the [OK] key 7 67 USER SETTINGS Audible signals (key entry beep, invalid key beep, base setting beep) The machine sounds three different types of beep signals: a key entry beep that sounds when a valid key is pressed, an invalid key beep that sounds when an invalid key is pressed, and a base setting beep that sounds when a setting is the same as the base setting (base settings are explained below). The base setting beep is initially disabled. If you wish to enable the base setting beep, see "SOUND AT DEFAULT" on page 64. If you wish to change the volume of the beep signals or disable them, see "KEY TOUCH SOUND" on page 64. The beep patterns of each type of beep signal are as follows: Key entry beep. . . . . . . . . . . . . . . . . . . . . One beep Invalid key beep. . . . . . . . . . . . . . . . . Three beeps Base settings The base settings are preset standard selections for each copy setting. The base settings are as follows: Copy ratio. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100% Light and Dark level . . . . . . . . . . . . . . . . . . center Paper feed location . . . . . . . . . . Paper tray AUTO/TEXT/PHOTO . . . . . . . . . . . . . . . . AUTO 68 8 Chapter 8 TROUBLESHOOTING AND MAINTENANCE Problems related to general use of the machine, the copy function, and software setup are explained here. Be sure to check the problem carefully before calling for service, as many problems can be solved by the user. ("XX" indicates paper size) An original remains on the document glass, or the original is too thick to scan. If the message is no cleared when CHECK SPF/RSPF. there is no original on the document START TO RESUME. glass, the underside of the RSPF is dirty. Clean the underside of the RSPF (especially areas where black lines appear. ) Printing is not possible if the paper size setting is different from the size of paper loaded in the tray. Load the same size of paper as the paper size LOAD XX PAPER INTO TRAY. setting and then press the [START] key ( ). ("XX" indicates paper size) The machine is not correctly connected NO PC COMMUNICATION; CHECK to the computer. (when using the scanner function). TD CARTRIDGE IS NEAR EMPTY. Steadily A DRUM lit CARTRIDGE WILL BE NEEDED SOON. NO 2-SIDED COPY FROM BYPASS TRAY. 30 35 35 38 29 35 62 - 25 87 19 46 70 TROUBLESHOOTING THE MACHINE The following problems are related to the general operation of the machine and copying. [. . . ] WARNING: THIS APPARATUS MUST BE EARTHED. A. Information on Disposal for Users (private households) 1. In the European Union Attention: If you want to dispose of this equipment, please do not use the ordinary dust bin!Used electrical and electronic equipment must be treated separately and in accordance with legislation that requires proper treatment, recovery and recycling of used electrical and electronic equipment. [. . . ]