User manual HASBRO XEVOZ SHOCK BERSERKER HYPERFURIES

[. . . ] TROUBLESHOOTING" (page 40). Please note · The explanations in this manual assume that you have a working knowledge of your Windows or Macintosh computer. · For information on your operating system, please refer to your operating system manual or the online Help function. · The explanations of screens and procedures in this manual are primarily for Windows Vista® in Windows® environments, and Mac OS X v10. 4 in Macintosh environments. The screens may vary depending on the version of the operating system. [. . . ] SYSTEM SETTINGS" in the Operation Guide. When the software selection screen appears in step 6 of "OPENING THE SOFTWARE SELECTION SCREEN (FOR ALL SOFTWARE)" (page 8), perform the steps below. 1 Click the [Printer Driver] button. To install the PC-Fax driver, click the [PC-Fax Driver] button on the "Disc 2" CD-ROM. 3 When you are asked how the printer is connected, select [IPP] and click the [Next] button. 4 * The above screen appears when using the "Disc 1" CD-ROM. If a proxy server is used, specify the proxy server and click the [Next] button. To specify a proxy server, select [Print via the proxy server] and then enter the [Address] and [Port number]. 2 Click the [Custom installation] button. 16 INSTALLING THE PRINTER DRIVER / PC-FAX DRIVER 5 Enter the machine's URL and click the [Next] button. Enter the URL in the following format: Normal format: http://<the machine's domain name or IP address>:631*1/ipp *1 Normally "631" should be entered for the port number. If the IPP port number has been changed on the machine, enter the new port number. When SSL is used: https://< the machine's domain name or IP address>:<port number*2>/ipp *2 Normally the port number and the colon ":" immediately preceding the port number can be omitted. If the IPP port number for SSL has been changed on the machine, enter the new port number. If your computer and the machine are connected to the same local area network, you can click the [Search] button to search for the machine. Select the URL and click the [OK] button. You will return to the above screen and the machine's URL will be automatically entered. 6 Perform steps 5 through 12 on page 15 to continue the installation. This completes the installation. · After installation, see "CONFIGURING THE PRINTER DRIVER FOR THE OPTIONS INSTALLED ON THE MACHINE" (page 23) to configure the printer driver settings. · If you installed the PS printer driver or the PPD driver, the PS display fonts can be installed from the "PRINTER UTILITIES" CD-ROM that accompanies the PS3 expansion kit. See "INSTALLING THE PS DISPLAY FONTS" (page 29). 17 INSTALLING THE PRINTER DRIVER / PC-FAX DRIVER WHEN THE MACHINE WILL BE CONNECTED WITH A USB CABLE Supported operating systems: Windows 2000*/XP*/Server 2003*/Vista*/Server 2008*/7* * Administrator's rights are required to install the software. · Make sure that a USB cable is not connected to your computer and the machine. If a cable is connected, a Plug and Play window will appear. If this happens, click the [Cancel] button to close the window and disconnect the cable. CHANGING THE PORT (page 30) · If you installed the PS printer driver or the PPD driver, the PS display fonts can be installed from the "PRINTER UTILITIES" CD-ROM that accompanies the PS3 expansion kit. See "INSTALLING THE PS DISPLAY FONTS" (page 29). · If you are using Windows Vista/Server 2008/7 If a security warning window appears, be sure to click [Install this driver software anyway]. · If you are using Windows 2000/XP/Server 2003 If a warning message regarding the Windows logo test or digital signature appears, be sure to click the [Continue Anyway] or [Yes] button. 10 When the installation completed screen appears, click the [OK] button. 21 INSTALLING THE PRINTER DRIVER / PC-FAX DRIVER USING THE MACHINE AS A SHARED PRINTER If you are going to use the machine as a shared printer on a Windows network with the printer driver or the PC-Fax driver installed on a print server, follow the steps below to install the printer driver or the PC-Fax driver on the client computers. · Ask your network administrator for the server name and printer name of the machine on the network. · For the procedure for configuring settings on the print server, see the operation manual or the Help file of the operating system. The "print server" explained here is a computer that is connected directly to the machine, and "clients" are other computers connected to the same network as the print server. · Install the same printer driver on client computers as the printer driver that is installed on the print server. When the software selection screen appears in step 6 of "OPENING THE SOFTWARE SELECTION SCREEN (FOR ALL SOFTWARE)" (page 8), perform the steps below. 1 Click the [Printer Driver] button. To install the PC-Fax driver, click the [PC-Fax Driver] button on the "Disc 2" CD-ROM. 4 Select the printer name (configured as a shared printer). (1) * The above screen appears when using the "Disc 1" CD-ROM. (2) (1) Select the printer name (configured as a shared printer on a print server) from the list. If you are using Windows 2000/XP/Server 2003, you can also click the [Add Network Port] button displayed below the list and select the printer to be shared by browsing the network in the window that appears. 2 3 Click the [Custom installation] button. Select [Use an existing port] and click the [Next] button. (2) Click the [Next] button. If the shared printer does not appear in the list, check the settings on the print server. 5 Perform steps 5 through 12 on page 15 to continue the installation. In the printer driver selection screen, be sure to select the same type of printer driver as the printer driver installed on the print server. This completes the installation. If you installed the PS printer driver or the PPD driver, the PS display fonts can be installed from the "PRINTER UTILITIES" CD-ROM that accompanies the PS3 expansion kit. See "INSTALLING THE PS DISPLAY FONTS" (page 29). 22 INSTALLING THE PRINTER DRIVER / PC-FAX DRIVER CONFIGURING THE PRINTER DRIVER FOR THE OPTIONS INSTALLED ON THE MACHINE After installing the printer driver, you must configure the printer driver settings appropriately for the options that have been installed and the size and type of paper loaded in the machine. Follow the steps below to configure the printer driver. If the PPD driver is installed, see "When the PPD driver is installed" (page 25). When the PCL printer driver, SAPL-c printer driver or PS printer driver is installed 1 Click the [Start] button ( ), click [Control Panel], and then click [Printer]. · In Windows XP/Server 2003, click the [start] button and then click [Printers and Faxes]. · In Windows 2000, click the [Start] button, select [Settings], and then click [Printers]. 3 4 Click the [Configuration] tab. Click the [Auto Configuration] button. The settings are automatically configured based on the detected machine status. If [Printers and Faxes] does not appear in the [start] menu in Windows XP, click the [start] button, click [Control Panel], click [Printers and Other Hardware], and then click [Printers and Faxes]. 2 Open the printer properties window. (1) Right-click the printer driver icon of the machine. (2) Select [Properties]. * The screen is that of PCL6 printer driver. [. . . ] · The software cannot be installed. 40 · The machine is not detected (when connected to a network). 40 · The plug and play screen does not appear (USB connection in Windows). 41 · The printer driver is not installed correctly by plug and play (USB connection in Windows). [. . . ]