User manual HASBRO YAHOO BUCKAROO

[. . . ] From the Table of Contents you can jump to various pages. Click this button to display the Index of the Online Manual. From the Index you can jump to various pages. To return to the previous link, click the ( ) button on the menu bar of the Acrobat Reader. CONTENTS INDEX 1 Takes you forward page by page. Following links Links can connect parts of a document to other parts for further information. [. . . ] The previewed original is sent to the original exit area, so you will need to return it to the SPF before starting the scanning job. To view Help for a setting, click the ( ) button in the upper right-hand corner of the window and then click the setting. CONTENTS INDEX 16 3 1 2 3 Scanning an Image from the "Scanner and Camera Wizard" (Windows XP) (part 1) Place the original you wish to scan on the original table/SPF. The procedure for scanning with the "Scanner and Camera Wizard" in Windows XP is explained here. The "Scanner and Camera Wizard" lets you scan an image without using a WIA-compliant application. 4 Click the "Next" button. Reference: For information on setting an original for scanning, refer to "ORIGINAL PLACEMENT" in the Operation Manual. Click the "start" button, click "Control Panel", click "Printers and Other Hardware", and then click "Scanners and Cameras". Click the "HASBRO AL-XXXX" (where XXXX is the model name of your unit) icon and then click "Get pictures" in "Imaging Tasks". The "Scanner and Camera Wizard" will appear. CONTENTS INDEX 17 3 5 Scanning an Image from the "Scanner and Camera Wizard" (Windows XP) (part 2) Select the "Picture type" and "Paper source", and click the "Next" button. If you placed the original on the original table, select "Flatbed" for the "Paper source". If you placed the original in the SPF, select "Document Feeder" for the "Paper source" and specify the original size in "Page size". You can click the "Preview" button to display the preview image. 6 Specify a group name, format and folder for saving the image, and then click the "Next" button. JPG, BMP, TIF or PNG can be selected for the format. To begin scanning, click the "Next" button. Note !If you select "Document Feeder" for the "Paper source" and click the "Preview" button, the top original in the SPF is previewed. You have completed the settings. CONTENTS INDEX 21 4 1 Identifying Unit Problems When any trouble has occurred in the unit, first, verify whether you can make a copy or not with the unit. Check the items shown below when the unit does not work properly but it can make a copy. Reference: If any copier trouble occurs, refer to "TROUBLESHOOTING" in the Operation Manual. Check the Connection between the Unit and Computer 2 Check Your Computer Plug and Play Screen does not Appear (when the USB is connected) Failed to Install the MFP Driver (Windows 2000/XP) What type of trouble do you have? · Printing trouble · Scanning trouble A B A Printing trouble When one of the troubles listed below occurs while printing, check the corresponding item. Faint, Uneven or Smeared Print Output Characters or Graphics are not Printed in Correct Position Nothing Prints Uninstalling HASBRO Personal MFP Series Software B Scanning trouble When one of the troubles listed below occurs while scanning data, check the corresponding item. Poor Scanning Result The Scanned Image is Incorrectly Positioned Unable to Scan the Image Uninstalling HASBRO Personal MFP Series Software Make sure that the unit is not working. You cannot print from your computer or scan from the unit while the unit is making copies. Note The unit's scanning function can only be used if the unit is connected to your computer with a USB cable. Caution If you fail to solve the problem after verifying all the items listed above, please contact your authorised HASBRO service centre. CONTENTS INDEX 22 4 Check the Connection between the Unit and Computer If the USB cable becomes disconnected If the USB cable becomes disconnected, even only once during the unit's operation, then printing and scanning may be disrupted. If this occurs, check the USB cable and ensure that it is securely connected, then restart the computer. Interface cables compatible with this unit are USB and parallel cables. Check which type of cable is supported by your computer, and then purchase one of the following cables accordingly: USB cable Shielded twisted pair cable (2 m (6 feet) Max. : highspeed transmission equivalent) Parallel interface cable IEEE 1284 - Shielded type bi-directional parallel interface cable (2 m (6 feet) Max. ) CHECK1 Is the interface cable compatible with the unit and computer? The unit's scanning function can only be used if the unit is connected to your computer with a Caution USB cable. CHECK2 Is the interface cable connected securely? Check if the interface cable is securely plugged into the connectors of the unit and computer. It is also advisable to ensure that the connector pins are not bent. Reference: See "CONNECTING THE INTERFACE CABLE" in the Operation Manual for more details on interface connection. CHECK3 Are any other USB peripherals being connected along with the unit? If other USB peripherals are connected through the same hub, disconnect them to see if the problem still exists. CONTENTS INDEX 23 4 Check Your Computer CHECK3 If your computer is connected to the unit through the parallel port, is the parallel port (LPT) mode set to other than EPP mode? The unit may not operate correctly if the parallel port mode is set to EPP mode. To set the parallel port mode to a mode other than EPP mode, refer to your computer manual or ask the manufacturer of the computer. ECP mode is recommended to obtain the best performance from the unit. [. . . ] When the image of the back side disappears and you can get only the needed image, click the "Apply" button to apply the new settings, and then click the "Scanning" button to scan the image. CONTENTS INDEX 30 4 The Scanned Image is Incorrectly Positioned Place the original straight on the original table. Reference: Refer to "ORIGINAL PLACEMENT" in the Operation Manual for the detail on how to set the original. If the scanned image is incorrectly positioned, refer to the check list shown below. CHECK1 Have you placed the original straight?CHECK3 Have you set the original correctly on the SPF? To scan from the SPF, align the guide to the original as shown in the illustration below. CHECK2 Have you set the original correctly on the original table? Place the original on the original table in the direction as shown in the illustration below. Align the centre of the original with ( ) mark. Align the guide to the original. CONTENTS INDEX 31 4 Unable to Scan the Image If you are using Windows 98/Me/2000 and your application is not TWAIN compliant, the application cannot acquire images. Use an application that is TWAIN compliant, such as the included Sharpdesk. If you cannot scan the image, turn off your computer. [. . . ]