User manual HASBRO YAHTZEE DELUXE EDITION-IN ENGLISH AND SPANISH094

[. . . ] If your copier is so marked, please read "I" for "ON" and " " for "OFF". For a complete electrical disconnection, pull out the main plug. The socket-outlet shall be installed near the equipment and shall be easily accessible. The CE mark logo label is affixed on an equipment in case that the directives described in the above sentence are applicable to the product. (This sentence is not applicable in any country where the above directives are not required. ) CINSE1982FC51 CONTENTS Page q q Page CHAPTER1 INTRODUCTION . . . . . . . . . . . . . . . . . . . . [. . . ] The darkness of the watermark can be adjusted in two levels. q CHAPTER3 SPECIAL FUNCTIONS Text stamp 1 Place the originals in the document feeder tray or on the document glass. READY TO CO 2 Press the SPECIAL MODES key. q The SPECIAL MODES screen will appear. READY TO COPY. SPECIAL MODES MARGIN SHIFT MULTI SHOT PAMPHLET COPY AUTO EXPOSURE ERASE COVERS IMAGE EDIT AUTO A4 PAPER SELECT OK DUAL PAGE COPY TRANSPARENCY INSERTS TEXT STAMP 100% COPY RATIO 3 Press the "TEXT STAMP" key on the touch panel. q The TEXT STAMP menu will appear. 3-38 TEXT STAMP PECIAL MODES EXT STAMP DATE WATERMARK PRINT DIRECTION SELECT STAMP PAGE NUMBER OK OK 4 Press the "WATERMARK" key on the touch panel. q The setting screen for WATERMARK will appear. READY TO COPY. OK WATERMARK Confidential Copy Draft CANCEL Urgent Preliminary Final OK 1ST PAGE ONLY CHAPTER3 ALL PAGES WATERMARK Confidential Copy Draft OPTION CANCEL Urgent Preliminary Final 1 O A OPTION 5 6 Select the desired watermark to be printed. SPECIAL FUNCTIONS Text stamp q The selected watermark will be highlighted. CANCEL Urgent Preliminary Final N OK 1ST PAGE ONLY ALL PAGES Select the pages to be printed with the watermark. q Indicate whether the watermark is to be printed only on the first page or on all pages, by pressing the "1ST PAGE ONLY" or "ALL PAGES" key. Confidential Copy Draft OPTION Urgent Preliminary Final 7 To adjust the exposure, press the "OPTION" key. Otherwise, proceed to step 9. q The following screen will appear. READY TO COPY. OK WATERMARK DARKNESS CANCEL OK TERMARK DARKNESS CANCEL OK 8 Adjust the darkness of the watermark. q q Press the key to darken or the key to lighten. key. To return to the previous screen, press the 3-39 TEXT STAMP 9 OK CANCEL CHAPTER3 SPECIAL FUNCTIONS Text stamp Press the lower "OK" key. q The TEXT STAMP menu will appear again. OK DATE WATERMARK PRINT DIRECTION SELECT STAMP PAGE NUMBER 10 Select the print direction. q If the PAMPHLET COPY function is used with this function, the portrait orientation ( ) must be selected. OK OK DATE WATERMARK SELECT STAMP PAGE NUMBER 11 Press the upper "OK" key. 1 4 7 AUDIT CLEAR 2 5 8 0 3 6 INT CLEAR ALL CA START 12 13 14 Make all other desired copier selections and enter the desired number of copies. Press the START ( q ) key. 9 PROGRAM If the document feeder is used, scanning of originals and copying will start. If the document glass is used, proceed to the next step. q P PLACE NEXT ORIGINAL. READ-END AUTO EXPOSURE AUTO A4 PAPER SELECT 100% COPY RATIO Replace the finished original with the next original after the START ( ) key indicator lights up, and then press the START ( ) key. Repeat this step until all originals have been scanned. Then, press the "READ-END" key on the touch panel. q q q Copying will start at this time. The setting procedure is described below. q CHAPTER3 SPECIAL FUNCTIONS Tandem copy INTERRUPT will not function during tandem copying. 1 2 READY TO CO Ensure that the two copiers are connected through the tandem-connection cable and they have been turned on. On the copier that will be set as the main copier, place the originals in the document feeder tray or on the document glass. 3 Press the SPECIAL MODES key. q The SPECIAL MODES screen will appear. READY TO COPY. SPECIAL MODES MARGIN SHIFT MULTI SHOT TANDEM COPY AUTO EXPOSURE ERASE COVERS IMAGE EDIT AUTO A4 PAPER SELECT OK DUAL PAGE COPY TRANSPARENCY INSERTS TEXT STAMP 100% COPY RATIO 4 Press the "TANDEM COPY" key on the touch panel. q The "TANDEM COPY" key will be highlighted. 3-44 TANDEM COPY OK DUAL PAGE COPY TRANSPARENCY INSERTS 1 4 7 AUDIT CLEAR 5 Press the "OK" key. 2 5 8 0 3 6 INTERRUPT 6 Make all other desired copier settings and enter the number of copies. q The functions selected on the main copier will be used by both copiers. CHAPTER3 (1) The key operator programs of which settings at the main copier are given priority (the settings at the sub copier are disregarded): CLEAR 9 PROGRAM C P Exposure Adjustment, Toner Save Mode, Initial Margin Shift, Erase Width Adjustment, Initial Status Setting, Staple Position Setting, Date Format Setting, Date and Time Adjustment and Disabling of Covers Mode. (2) The key operator programs for which the same settings between the main and sub copiers are required: Disabling of Duplex Copying and Disabling of Stapler. (3) The key operator program that can only be set at the main copier: Disabling of Auto Paper Selection. (4) In case of the other key operator programs than mentioned above, different settings on the main and sub copiers respectively do not matter even when the tandem copying is activated. SPECIAL FUNCTIONS Tandem copy 7 INTERRUPT CLEAR ALL Ensure that paper of the same size selected in the main copier is installed in the sub copier. q Paper of the same size and same orientation must be installed in the two copiers. Even if the image of the original is rotated to match the copy paper in the main copier, the orientation of the copy paper in the sub copier must be the same as that in the master copier. CA START CLEAR 8 On the main copier, press the START ( q ) key. Images scanned by the main copier will be stored in both copiers. Half the number of copies selected will be made simultaneously on both copiers. When the number of copies selected is odd, one more copy will be made on the main copier than the sub copier. If the message "CHECK THE SUB MACHINE. " appears on the main machine, an error has occurred in the sub machine. Check the message on the sub machine and clear the error. [. . . ] If the trouble cannot be easily remedied, use key operator program "DISABLING OF STAPLER" (page 8-28) to prevent the use of the stapler. Contact your authorised Sharp Service Centre for service. Contact your authorised Sharp Service Centre for service. (This message will appear when an optional finisher (ARFN3) malfunctions. ) Use key operator program "DISABLING OF DUPLEX COPYING" (page 8-27) to prevent the use of the duplex system. [. . . ]