User manual HASBRO ZOIDS DIBISON MOTORIZED

[. . . ] Ensure printing has been completed before turning the power off. Do not remove the power cord before turning Caution the unit off. The flow chart shown below provides printing overview. Reference:For more information on printing, see "Basic Printing" (p. 2). Prepare the document you intend to print Open the printer driver setup screen and set the print preferences Reference: "Printer Driver Settings" (p. 4), "Printing a Watermark" (p. 5), "Fitting the Printed Image to the Paper" (p. 6), "Printing Multiple Pages on One Page" (p. 7) Send print data from your computer Printing Exit printing 1 1 1 2 Basic Printing Start WordPad, make a new file, and enter the text you intend to print. Note This is a printing example using WordPad to print a document onto A4 size paper. Windows 2000 does not have the "Preferences" button on this dialog box. Switch to the desired tab by clicking it to specify printer settings. Select "Print" from the application's "File" menu. 4 Click the "Print" button in the "Print" dialog box. On Windows 98/Me, click the "OK" button. HASBRO AR-xxxx 3 Make sure that "HASBRO AR-xxxx" is selected as the current printer. [. . . ] The scan screen of the WIA driver will appear. HASBRO AR-xxxx 18 3 3 Scanning an Image from a WIA-Compliant Application (Windows XP/Vista) (part 2) Select the paper source and picture type, and click the "Preview" button. If you placed the original on the document glass, select "Flatbed" for the "Paper source". If you placed the original in the SPF, select "Document Feeder" for the "Paper source" and specify the original size in "Page size". 4 Click the "Scan" button. Scanning begins and the image is acquired into Paint. Use "Save" in your application to select a file name and folder for the scanned image, and save the image. To cancel your scanning job after clicking the "Scan" button, click the "Cancel" button. Note If you select "Document Feeder" for the "Paper source" and click the "Preview" button, the top original in the SPF is previewed. The previewed original is sent to the original exit area and the following original stops in the SPF. To eject the original, press "C (clear)" key and return those ejected originals to the SPF before starting the scanning job. To view Help for a setting, click the ( ) button in the upper right-hand corner of the window and then click the setting. 19 3 1 2 3 Scanning an Image from the "Scanner and Camera Wizard" (Windows XP) (part 1) Place the original you wish to scan on the document glass/SPF. The procedure for scanning with the "Scanner and Camera Wizard" in Windows XP is explained here. The "Scanner and Camera Wizard" lets you scan an image without using a WIA-compliant application. 4 Click the "Next" button. Reference:For information on setting an original for scanning, refer to "ORIGINAL PLACEMENT" in the Operation Manual. Click the "start" button, click "Control Panel", click "Printers and Other Hardware", and then click "Scanners and Cameras". Click the "HASBRO AR-xxxx" icon and then click "Get pictures" in "Imaging Tasks". ) on the task 4 Set up the start-up application in the "Application Selection" area. When the "Show TWAIN setting screen when scanning" checkbox is selected, the scan setting screen appears when scanning is executed to let you adjust the scanning conditions. Note If the Button Manager icon does not appear on the task bar, click the "start" button, select "All Programs" ("Programs" on Windows 98/Me/2000), select "HASBRO Button Manager S", and then click "Button Manager" to start Button Manager. Note Reference:"Outline of Button Manager" (p. 23) 2 3 Select "Settings" from the displayed pop-up menu. The setting screen of Button Manager will open. 5 6 Set up the "Colour Mode", "Edge" and other scan settings in the "Scan Setup" area. Reference:"Outline of Button Manager" (p. 23) Reference:"Outline of Button Manager" (p. 23) Click the tab of the scan menu you want to set up. Click the "OK" button. You have completed the settings. 24 4 Identifying Unit Problems When any trouble has occurred in the unit, first, verify whether you can make a copy or not with the unit. Check the items shown below when the unit does not work properly but it can make a copy. Reference:If any copier trouble occurs, refer to "TROUBLESHOOTING" in the Operation Manual. 1 "Check the Connection between the Unit and Computer" (p. 26) 2 "Check Your Computer" (p. 27) "Plug and Play Screen does not Appear" (p. 28) "Failed to Install the Driver (Windows 2000/XP)" (p. 29) What type of trouble do you have? · Printing trouble · Scanning trouble A B A Printing trouble When one of the troubles listed below occurs while printing, check the corresponding item. "Faint, Uneven or Smeared Print Output" (p. 30) "Characters or Graphics are not Printed in Correct Position" (p. 31) "Nothing Prints" (p. 32) B Scanning trouble When one of the troubles listed below occurs while scanning data, check the corresponding item. "Poor Scanning Result" (p. 33) "The Scanned Image is Incorrectly Positioned" (p. 34) "Unable to Scan the Image" (p. 35) Make sure that the unit is not working. You cannot print from your computer or scan from the unit while the unit is making copies. Note If you fail to solve the problem after verifying all the items listed above, please contact your authorised service representative. 25 4 Check the Connection between the Unit and Computer If the USB cable becomes disconnected If the USB cable becomes disconnected, even only once during the unit's operation, then printing and scanning may be disrupted. If this occurs, check the USB cable and ensure that it is securely connected, then restart the computer. Interface cable compatible with this unit is USB cable. USB cable Use a shielded cable. CHECK1 Is the interface cable compatible with the unit and computer? CHECK2 Is the interface cable connected securely? Check if the interface cable is securely plugged into the connectors of the unit and computer. [. . . ] The unit needs a longer time to process intricate data. If the unit still does not print, refer to the check list below. CHECK1 Has a paper jam occurred? When the misfeed ( ) indicator blinks or ( ) blinks in the display, the unit will stop because of a misfeed. Remove the jammed paper as explained in "MISFEED REMOVAL" in the Operation Manual. CHECK2 Is the ON LINE indicator off? The ON LINE indicator on the operation panel turns off while the unit is used for copying. [. . . ]