User manual HASBRO ZOIDS REV RAPTOR

[. . . ] In some areas, the "POWER" switch positions are marked "I" and " " on the copier instead of "ON" and "OFF". The symbol " " denotes the copier is not completely de-energized but in a stand-by condition at this "POWER" switch position. If your copier is so marked, please read "I" for "ON" and " " for "OFF". Caution! For a complete electrical disconnection, pull out the main plug. The socket-outlet shall be installed near the equipment and shall be easily accessible. Required in IEC-950 (EN 60 950) - Europe · The equipment should be installed near an accessible socket outlet for easy disconnection. [. . . ] The images will be inverted in the right to left direction on the copies. A C CHAPTER3 SPECIAL FUNCTIONS Image editing functions B D B D A C 1 Place the originals on the document glass or in the optional document feeder tray. SPECIAL MODES READY TO 2 Press the SPECIAL MODES key. q The SPECIAL MODES screen will appear. 2-SIDED COPY READY TO COPY. SPECIAL MODES MARGIN SHIFT CENTRING COVERS AUTO EXPOSURE ERASE OK DUAL PAGE COPY 3 Press the "IMAGE EDIT" key on the touch panel. q The IMAGE EDIT menu will appear. TRANSPARENCY INSERTS COLOUR ADJUSTMENTS A4 AUTO PAPER SELECT IMAGE EDIT 100% COPY RATIO 3-30 IMAGE EDITING FUNCTIONS CHAPTER3 READY TO COPY. SPECIAL MODES IMAGE EDIT SINGLE COLOUR PHOTO REPEAT EXTRA SIZE NEG. /POS. REVERSE A3 FULL-BLEED OK OK MIRROR IMAGE MULTI-PAGE ENLARGEMENT 4 Press the "MIRROR IMAGE" key on the touch panel. q The "MIRROR IMAGE" key will be highlighted. SPECIAL FUNCTIONS Image editing functions 5 OK NEG. /POS. REVERSE 11 17 OK MIRROR IMAGE MULTI PAGE Press the upper "OK" key. 6 Make all other desired copier selections and enter the desired number of copies. 7 Press the COLOUR COPY START ( COPY START ( ) key. q ) key or BLACK To cancel the MIRROR IMAGE function, press the MIRROR IMAGE again on the IMAGE EDIT menu screen. 3-31 IMAGE EDITING FUNCTIONS PHOTO REPEAT Original C C Copy C B C C B PHOTO REPEAT is used to produce repeated images of a photo on a single sheet of copy paper. (Refer to the samples on page 2 to see the effect on copy images in relation to the PHOTO REPEAT mode. ) q B B B Up to 24 repeats can be made on a single copy sheet. The number of copies on a single sheet depends on the original size and copy paper size. Reduction or enlargement cannot be selected with this function. If reduction or enlargement has been selected, the copy ratio will be reset to 100% when this function is selected. When making 10 repeats of a 57 x 100 mm (2 1/8" x 3 5/8") or smaller original, however, the copy ratio will become 95%. q CHAPTER3 SPECIAL FUNCTIONS Image editing functions q This function will not work when non-standard size paper is used. 1 Place the original on the document glass. q q The optional document feeder cannot be used with this function. Place ~70 x 100 mm (2 ½" x 4"), ~65 x 70 mm (2 ½" x 2 ½"), and ~57 x 100 mm (2 1/8" x 3 5/8") originals as shown below. Centring scale Placing a ~70 x 100mm (2 ½" x 4") or ~57 x 100mm (2 1/8" x 3 5/8") original Centring scale Placing a ~65 x 70mm (2 ½" x 2 ½") original SPECIAL MODES READY TO 2 3 Press the SPECIAL MODES key. q The SPECIAL MODES screen will appear. 2-SIDED COPY READY TO COPY. Overlapped areas will be made along the leading and trailing edges of each copy. To cancel the MULTI-PAGE ENLARGEMENT function, select the MULTI-PAGE ENLARGEMENT function again and press the "CANCEL" key. 3-37 IMAGE EDITING FUNCTIONS EXTRA SIZE The EXTRA SIZE function provides a method for entering the dimensions of non-standard size copy paper and non-standard size originals for the purpose of automatic enlargement or reduction of the image for a best fit onto the copy paper. 5 KEY OPERATOR Extra paper size setting for each individual paper tray of the copier can be made. See page 8-13. CHAPTER3 SPECIAL FUNCTIONS Image editing functions 1 Place the non-standard original on the document glass or the non-standard copy paper into the bypass tray. q Either one or both can be set. SPECIAL MODES READY TO 2 Press the SPECIAL MODES key. q The SPECIAL MODES screen will appear. 2-SIDED COPY READY TO COPY. SPECIAL MODES MARGIN SHIFT CENTRING COVERS AUTO EXPOSURE ERASE OK DUAL PAGE COPY 3 Press the "IMAGE EDIT" key on the touch panel. q The setting screen for IMAGE EDIT selections will appear. TRANSPARENCY INSERTS COLOUR ADJUSTMENTS A4 AUTO PAPER SELECT IMAGE EDIT 100% COPY RATIO 3-38 IMAGE EDITING FUNCTIONS CHAPTER3 READY TO COPY. SPECIAL MODES IMAGE EDIT SINGLE COLOUR PHOTO REPEAT EXTRA SIZE NEG. /POS. REVERSE A3 FULL-BLEED OK OK MIRROR IMAGE MULTI-PAGE ENLARGEMENT 4 Press the "EXTRA SIZE" key on the touch panel. q The setting screen for EXTRA SIZE will appear. SPECIAL FUNCTIONS Image editing functions READY TO COPY. OK EXTRA SIZE X Y ORIGINAL SIZE 210 148 CANCEL (64~432) mm (64~297) mm OK ENABLE AUTO SIZE DETECTION PAPER SIZE FOR BYPASS READY TO COPY. OK EXTRA SIZE X Y ORIGINAL SIZE 210 148 CANCEL (64~432) mm (64~297) mm 5 OK If a non-standard size original has been set on the document glass, adjust the original size using the and keys. If a standard size original has been set on the document glass, check the "ENABLE AUTO SIZE DETECTION" check box. q q ENABLE AUTO SIZE DETECTION PAPER SIZE FOR BYPASS READY TO COPY. Adjust each X (horizontal) and Y (vertical) dimension using the and keys. If the "ENABLE AUTO SIZE DETECTION" check box is checked on either tab, the size detection function will be activated. In this case, the "X/Y" keys and " / " keys will be grayed out not to allow any input. OK EXTRA SIZE X Y ORIGINAL SIZE 330 148 CANCEL (64~432) mm (64~297) mm OK 6 Press the "PAPER SIZE FOR BYPASS" tab. ENABLE AUTO SIZE DETECTION PAPER SIZE FOR BYPASS 3-39 IMAGE EDITING FUNCTIONS CHAPTER3 SPECIAL FUNCTIONS Image editing functions READY TO COPY. OK EXTRA SIZE X Y ORIGINAL SIZE 210 148 CANCEL (139~432) mm (100~297) mm 7 OK If non-standard size paper has been set in the bypass and keys. If tray, adjust the paper size using the standard size paper has been set in the bypass tray, check the "ENABLE AUTO SIZE DETECTION" check box. q q ENABLE AUTO SIZE DETECTION PAPER SIZE FOR BYPASS I Adjust each X (horizontal) and Y (vertical) dimension using the and keys. [. . . ] Contact your authorised Sharp Service Centre for service. Contact your authorised Sharp Service Centre for service. (This message will appear when the optional staple sorter (AR-SS2) malfunctions. ) Use key operator program "DISABLING OF DUPLEX COPYING" (page 8-19) to prevent the use of the duplex system. Contact your authorised Sharp Service Centre for service. [. . . ]