User manual HASBRO ZOIDS SLEDGE HEAD

[. . . ] Do not look directly at the light source. Do not switch the unit rapidly on and off. After turning the unit off, wait 10 to 15 seconds before turning it back on. Unit power must be turned off before installing any supplies. [. . . ] The path an event takes to get to the user's selected application depends upon the event settings for the device. Scanner ALxxxx (where xxxx is the model name of your unit) SCANNER key pressed. Shown are two applications registered to handle the scanner event from the AL-xxxx (where xxxx is the model name of your unit) device. Using the SCANNER key to begin scanning Scanning is not possible during a copy job. If the SCANNER ( ) key is pressed during a print job, the scan job will be stored. When scanning an original that has been placed in the SPF/RSPF, only one original can be placed unless you are using Sharpdesk. Press the right copy quantity key to display the number of the application that you wish to use for scanning. 37) and then open the settings window of the Button Manager. Button Manager starts and the application associated with Button Manager starts. If you want only Button Manager to start in this case, set up Button Manager for use in Windows as explained in "Setting up the Button Manager" (p. If step 4 is performed with the "Show TWAIN setting screen when scanning" checkbox selected in the Scan Parameter Setting Dialog Box (p. right-click the icon of the printer to be used and click "Properties". Click the "Ports" tab ("Details" tab - on Windows 95/98/Me) in the "Properties" window, select "LPT1" (or the currently used port), and click the "OK" button. To use the HASBRO Personal MFP series again, perform the same procedure but select the port to be used (for example, LPT1) in step 4. This unit includes both USB and parallel interface connectors. Interface cables for connecting the unit to your computer are not included with this unit. If you intend to use the unit as a scanner, it must be connected to your computer with a USB interface cable. The scanner function cannot be used if the unit is connected with a parallel cable. USB is available with a PC/AT compatible computer that was originally equipped with USB and had Windows 98, Windows Me, Windows 2000 Professional, Windows XP Professional or Windows XP Home Edition preinstalled. Do not connect the interface cable before installing the MFP driver. The interface cable should be connected during installation of the MFP driver. Insert the other end of the cable into the interface connector of your computer, or the USB hub connected to your computer. [. . . ] In no event shall HASBRO'S total liability to you for all damages, losses, and causes of action (whether in contract, tort (including negligence) or otherwise) exceed the amount paid by you for the Software. For a portion of the Software related with Apple Macintosh and Microsoft Windows, this license shall be governed by and construed in accordance with the laws of the state of California and Washington, respectively. If for any reason a court of competent jurisdiction finds any provision of this License, or portion thereof, to be unenforceable, that provision of the License shall be enforced to the maximum extent permissible so as to effect the intent of the parties, and the remainder of this License shall continue in full force and effect. This License constitutes the entire agreement between the parties with respect to the use of the Software and related documentation, and supersedes all prior or contemporaneous understandings or agreements, written or oral, regarding such subject matter. [. . . ]