User manual HASBRO ZOIDS ZABER FANG

[. . . ] The socket-outlet shall be installed near the equipment and shall be easily accessible. The CE mark logo label is affixed on an equipment in case that the directives described in the above sentence are applicable to the product. (This sentence is not applicable in any country where the above directives are not required. ) CINSE1794FC51 CONTENTS GETTING STARTED q q q q q q Page GETTING STARTED INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 USING THIS MANUAL . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 INSTALLATION REQUIREMENTS . . . . . . . . . . . . . . . . . . [. . . ] Do not use thinner, benzene, or similar volatile cleaning agents. q If an optional document feeder is installed, wipe the transport belt with a soft, clean cloth. GENERAL INFORMATION User maintenance 42 MAINTENANCE REQUIRED When the message "READY TO COPY. (MAINTENANCE REQUIRED : )" appears, service by an authorised Sharp Service Technician will be required soon. Contact your Service Centre as soon as possible. GENERAL INFORMATION Maintenance required 43 SPECIFICATIONS COPIER Type Copy system Originals Original sizes Copy sizes Desktop Dry, electrostatic transfer system Sheets, bound documents Max. A6 (5-1/2" x 8-1/2") Image loss: Max. 4 mm (5/32") (leading and trailing edges) 40 copies/min. (A4 (8-1/2" x 11")) 31 copies/min. (A4R (8-1/2" x 11"R)) 26 copies/min. (B4 (8-1/2" x 14")) 22 copies/min. Variable: 50 to 200% in 1% increments, total 151 steps Fixed presets: 50%, 70%, 81%, 86%, 100%, 115%, 122%, 141%, 200% (50%, 64%, 77%, 95%, 100%, 121%, 129%, 141%, 200%) Moving optical source, slit exposure (stationary platen) with automatic exposure function Choice of one or two 500-sheet automatic feed paper trays; one manual feed tray with 50-sheet automatic feed capability Heat rollers Magnetic brush development Halogen lamp Local voltage ±10% (For this copier's power supply requirements, see the name plate located on the right hand side at the rear bottom corner of the copier. ) Max. 1. 75 kW for AC 200 ­ 240V power supply) Copying speed (at 100% copy ratio) Continuous copy First-copy time Warm-up time Copy ratio Exposure system Copy paper feed GENERAL INFORMATION Specifications Fusing system Developer system Light source Required power supply Power consumption 44 SPECIFICATIONS Overall dimensions 1205 mm (W) x 650 mm (D) (47-29/64" (W) x 25-19/32" (D)) Approx. 72 kg (158. 8 lbs. ) (with 500-sheet paper drawer) Approx. q Loading copy paper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . q Misfeed removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . q Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 49 49 49 50 54 55 57 58 58 59 60 61 63 64 66 68 70 71 71 72 74 75 OPTIONAL EQUIPMENT 47 SYSTEM CONFIGURATION The options which are available for the ZOIDS ZABER FANG are shown below. 20-bin sorter (SF-S15) Reversing automatic document feeder (SF-A58) Duplex module (SF-DM11) Document cover (SF-CV13) Cassette (SF-IC11) 20-bin staple sorter (SF-S56) Stand/3000-sheet paper drawer (SF-D23) 500-sheet paper drawer (SF-CM11) System configuration OPTIONAL EQUIPMENT Stand/500-sheet paper drawer (SF-D24) q q q q Card counter (SF-EA11) Auditor (SF-EA12) Counter commander (SF-EA13) Personal counter (SF-71A/71B) NOTE: Operating instructions follow for the Document Feeder (SF-A58), Sorters (SF-S15 and SF-S56), Stand/3000-Sheet Paper Drawer (SF-D23), and Stand/500-Sheet Paper Drawer (SF-D24). For the Card Counter (SF-EA11), the Auditor (SF-EA12) and the Counter Commander (SF-EA13), see their manual. 48 REVERSING AUTOMATIC DOCUMENT FEEDER (SF-A58) The reversing automatic document feeder (RADF) will handle A5 to A3 (5-1/2" x 8-1/2" to 11" x 17") originals. Two-sided originals can be copied automatically without having to manually turn them over. PART NAMES Feeding roller cover Original guides Document feeder tray Document feeder cover Exit roller cover Document feeder indicators Document feeder indicators Original feed indicator Indicates the originals in the tray will be fed. Original reminder Indicates an original is still on the document glass. Specifications Acceptable originals Single-sided originals: 50 to 128 g/m2 (14 to 34 lbs. ) Two-sided originals: 50 to 128 g/m2 (14 to 34 lbs. ) for A5 and A4 (5-1/2" x 8-1/2" and 8-1/2" x 11") originals. 50 to 110 g/m2 (14 to 29 lbs. ) for B4 and A3 (8-1/2" x 14" and 11" x 17") originals. Size: A5 to A3 (5-1/2" x 8-1/2" to 11" x 17") Capacity: Up to 50 sheets for A5, A4, and B4 (5-1/2" x 8-1/2", 8-1/2" x 11", and 8-1/2" x 14") originals provided the total aggregate thickness does not exceed 6. 5 mm or 1/4" (50 to 80 g/m2 or 14 to 20 lbs. ) or 5 mm or 3/16" (80 to 128 g/m2 or 21 to 34 lbs. ) Up to 30 sheets for A3 (11" x 17") originals In some regions, 216 mm x 330 mm (8-1/2" x 13") size can be used as a standard size. 12 kg (26. 5 lbs. ) 592 mm (W) x 521 mm (D) x 148 mm (H) (23-5/16" (W) x 20-33/64" (D) x 5-53/64" (H)) RADF (SF-A58) OPTIONAL EQUIPMENT Power supply Weight Dimensions Specifications are subject to change for improvement without notice. 49 RADF (SF-A58) Using the RADF NOTES: q Before loading originals into the document feeder tray, be sure to remove any staples or paper clips from them. The RADF can handle a maximum of 50 originals. q Badly damaged originals may misfeed in the RADF. [. . . ] NOTE: Since we would like you to fully understand the purpose of this mode, we suggest that you enable this mode and set the most appropriate time using program P21. When P86 is entered, the following message will appear. P86: DISABLING OF AUTO POWER SHUT-OFF MODE. 1. YES 2. NO To disable the auto power shut-off mode, press key 1. [. . . ]