User manual HATCO TR-TKM-0400

[. . . ] TOAST-RITE & TOAST KING ® ® Electric Conveyor Toasters TRH & TK Series Installation & Operating Manual I&W #07. 05. 002. 00 This manual contains important safety information concerning the maintenance, use and operation of this product. Failure to follow the instructions contained in this manual may result in serious injury. If you're unable to understand the contents of this manual, please bring it to the attention of your supervisor. Do not operate this equipment unless you have read and understood the contents of this manual. Este manual contiene importante información sobre seguridad concerniente al mantenimiento, uso y operación de este producto. [. . . ] Failure to do so could result in personal injury. 7 Form No. TR/TKM-0400 OPERATION ALL MODELS UL 1. Plug cabinet into an electrical outlet of the correct voltage, size and plug configuration. See Specifications for details. L IG H TE 2. Turn the Selector Switch, located on the front panel, to "Toast" or "Buns". NOTE: When toasting buns, place cut side down and set Selector Switch to the "Buns" position. When toasting bagels, place cut side up and set Selector Switch to the "Toast" position. Turn the Speed Control to the lightest/fastest position while the unit heats up. NOTE: Allow approximately 15 minutes for a warm-up period. After warm-up period, set the Speed Control to medium position and toast two slices of bread product. Adjust the Speed Control to the desired amount of browning. NOTE: To toast moist products such as English muffins, rye bread or whole wheat, slow the conveyor by turning the Speed Control knob to a slower/darker setting (clockwise). CAUTION The toasting of coated products such as garlic bread, cheese sandwiches and sweet rolls is NOT recommended. Residue will reduce toaster performance and could possibly ignite inside the toaster. Maximum Product Thickness: 1¼" (3 cm). Toasting of thicker products is NOT recommended. Products thicker than 1¼" (3 cm) will cause the conveyor system to jam which could possibly ignite product inside the toaster. Speed Control R DA RK Figure 7. Control Panel Manual Advance The manual advance knob is located on the right side panel of the toaster. This knob permits manual rotation of the baskets and allows rapid discharge of toast. During the cleaning operation, the manual advance knob permits rotation of the baskets for removal without energizing the toaster. Thermostat Adjustment The thermostat adjustment screw is located on the control panel. This thermostat controls the toasting chamber temperature. [. . . ] Louis 314-890-0700 Kaemmerlen Parts & Service St. Louis 314-535-2222 NEBRASKA Anderson Electric Omaha 401-331-1163 Comm. Appliance Service Tampa 813-663-0313 GEORGIA Southeastern Rest. Norcross 770-446-6177 HAWAII Burney's Comm. [. . . ]