User manual HAUCK ALASKA

[. . . ] The maximum load on this pram may not exceed 15 kg. WARNING: Do not leave your child unsupervised. WARNING: Keep plastic packaging materials out of the reach of children in order to avoid a risk of suffocation. WARNING: Before use, make certain that all locking positions are closed. [. . . ] The pram may only be used for transporting one child. Please make sure that the child's hands are nowhere near the folding area so as not to risk them being crushed if you have to fold up, unfold or otherwise change the pram or parts of it. Chassis with pushchair superstructure Snug nest Leg cover 4 wheels Erect the pushchair by moving the slide until you can see and hear that the locking mechanisms on both sides have engaged. Slip both wheels on to the front axle until you hear a click and the metal clips have clicked into place in the axle groove. Ush the axle through the two plastic check rails at the frame ends until it clicks home. To lock the foot brake, press the brake bar down with your foot. To release it again, lift the brake bar with your foot. Always lock the brakes when parking the pushchair. Push the hood in the corresponding openings to the left and right of the pushchair superstructure. The push bar can be swivelled to use the pushchair with snug nest. To do so, pull the upper adjusting lever on the push bar and move it over to the other side at the same time. After adjusting the required height, the buttons pop out again. To adjust the back rest, pull the metal handle at the back of the rest up and move the back rest back. The sitting position is achieved by pushing the back rest up until the locking mechanism engages. After adjusting the required position, the buttons pop out again. Fit the belt between the legs and around the hips. To avoid any injuries, you should always secure your child with the safety belt. Pull the lower unlocking levers on both sides of the push bar upwards and push the pushchair down to collapse. The carrying bag is securely fixed when you attach D-rings on to the hooks. Make sure that the frame is stable, the screws are tight, the latching devices are safely locked, the wheels are securely attached and the brakes are in working order. [. . . ] Do not re-fit the covers until they are completely dry. Cleaning the frame Dry the pram with a soft cloth after cleaning or after use in rain and snow. Use only mild soapy water or lukewarm water to clean the frame of your pram. Plastic parts can be cleaned with standard cleaners. [. . . ]