User manual HAUPPAGE WINTV-NOVA-T USB2 QI

[. . . ] To start the Nova-USB2 software installation, click Start / Run then type your CD-ROM drive Letter (for example: D:\) and then Setup. Select your language for the installation "English is default" and Click "Next " It is recommended to leave the default components ticked and select "Install" and follow the on screen instructions. Once the installation is complete the WinTV2000 Icon will appear on the desktop which will allow you to run "Hauppauge WinTV". Time counter Skip back 10 Video-Position Skip forward 10 secs You can change channels by using the channel up or channel down buttons on WinTV2000. [. . . ] Once you let the control bar go, audio/video starts to play (it might take a few seconds for the WinTV2000 application to start playing). You might have to move the Video Position indicator to the left and right to find the desired spot to start replaying audio/video. While Replaying, your audio/video program continues to be recorded in the Replay Buffer. Therefore, if you have clicked the Replay button 3 times (so that you are replaying the audio/video seen 30 seconds ago), the video you see in the WinTV window will be 30 seconds behind the "live" audio/video program. WinTV-Scheduler, once it is set, can be closed, and the WinTV application will "wake up" at the desired time and tuned to the desired channel. After installation, WinTV-Scheduler can be found by going to Start / Program files / Hauppauge WinTV. WinTV-Scheduler works by using the Windows Task Scheduler to launch WinTV at the chosen time. WinTV-Scheduler sets up a command line in Task Scheduler to run WinTV2000, specifying a TV channel and a length of time to record. To set up an event for timed watching or recording, run WinTV-2000 Scheduler and click on the Add Program. EXE is loaded every time after Windows has restarted. If you need to restart the remote control, run IR32. When you click the Go button on the Remote transmitter, after 3-4 seconds the Remote icon should flash, indicating that the Remote application is running. After the remote icon flashes, the WinTV appplication selector will appear in a window on your screen. Remote control when watching live TV 0-9 buttons: channel numbers Full button: makes WinTV go full screen. Clicking the full button again brings WinTV into a window. Remote control when playing video recordings Skip ahead button: skips ahead in the video 30 seconds per click. Holding the skip ahead button will autorepeat, and advances the video about 5 minutes per 10 seconds the button is depressed. Skip back button: skips back 30 seconds per click. Pressing and holding the skip back button makes the video go back about 5 minutes for 10 seconds the button is depressed. Use the left and right arrows to change to other Windows tasks. Green power button: will turn off the WinTV application 0 - 9 buttons: When playing back a recording, the "1" button will skip to 10%, the "2" button 20% etc of the length of the recording. To remove the driver and application Insert the installation CD, click Start / My Computer, double click your CD-ROM drive, doubleclick on a file called 'hcwclear. [. . . ] Unclicking the Pause button will cause the audio/video program to start playing from the point where the button was originally pushed. Most WinTV 2000 functions are active while in the Pause or Pause Live mode. For example, you can change volume, resize the TV window, go into "no-title mode", etc. While in Pause mode, the Video Position bar shows the amount of the Replay Buffer which is filled with video. [. . . ]