User manual HAUPPAUGE WINTV-HVR-1250

[. . . ] Installing the WinTV-HVR-1250 board 5. Install the WinTV-HVR-1250 driver Installing the WinTV-HVR under Vista Boot into Windows Vista. Insert the WinTV-HVR Installation CD-ROM in your PC's CD-ROM drive. When the Found New Hardware box opens, click Locate and install driver software. WinTV-HVR-1250 Quick Installation Guide for Windows Vista (all versions) QI-WINTV-HVR1250-V1A · 2/1/2008 © Hauppauge Computer Works, Inc. [. . . ] When finished watching TV full screen, right click your mouse button. If you see video with a black box around it, click the Pref button then click TV mode tab. Check the box which says "Allow resolution change". Rename your recorded video file: To rename a video file, on the video filename click once with your right mouse button, click Rename and then type in a new name. Remember: you must keep the MPG extension on the file. Delete recorded video files which you no longer want: Click your right mouse button on the video file once, go down the menu and click Delete. Play: Clicking the Play button will playback from disk the last video file created. When playing a video, you can rewind, fast forward, replay 10 sec or skip forward 10 sec using the buttons on the control bar. Pause: Clicking the Pause button while Playing will pause your audio/video. The Hauppauge Remote Control (optional on some models) The WinTV remote control software is installed automatically during the installation of the WinTV applications. You will see the WinTV Remote icon in the Device Tray. The installation will add a shortcut to IR. EXE to the Startup group, so that IR. EXE is loaded every time after Windows has booted. If you need to restart the remote control, select Restart IR from the Start \ All Program Files\WinTV Go button Application on/off menu. Pause button: if watching live TV, will open the record/play menu box and stop the video. When recording, this button will pause the video but WinTV will continue to record. If playing back video, this button will pause the video playback. Click the Pause button to start playing again. Stop button (square icon): stops the recording or playback. Play button: plays the last video recorded. Back/Exit button: will close the record, play or pause menus. 0 - 9 buttons: When in "live" TV mode, is used to directly enter channel numbers. When playing back a recording, the "1" button will skip to 10%, the "2" button 20%, etc. Skip ahead button: holding the skip ahead button advances the video about 5 minues per 10 seconds the button is depressed. [. . . ] Conflicts with Intervideo WinDVD Sometimes we have found that a previously installed version of WinDVD will conflict with the WinTV-HVR. Symptoms include: black screen but you can hear audio, failure to scan for channels, you can't change MPEG formats without errors, bad audio/video sync, and others. Uninstalling WinDVD will fix this problem. You uninstall WinDVD through the "Add/Remove Programs" in Control Panel. [. . . ]