User manual HAWKING HGMS224

[. . . ] 1 FCC Warning This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limitations are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. [. . . ] Moreover, the switch has no exclusiveness, meaning that the MIS can group switches of any brand and the web cluster switch will not reject any other switch from any other brand. Web Cluster Menu A pop-up menu will be displayed after clicking the "Web Cluster" item in the main menu. 54 There are 16+1 rows in the web cluster menu. The top row, with the deep blue background, indicates the master switch IP and cannot be modified. The other 16 rows, in a lighter blue background, can be added with managed switches by clicking Add/Del Switches. In the row, there is specific information about the managed switch: host names and their IPs. If the host is a Web Cluster-supported switch, an asterisk (*) will appear before the host name. The current managed switch will be highlighted in red on the menu. You can switch to another host by clicking on it and the browser window will jump to its homepage. Web Cluster setting In this page, you can add or delete web cluster group members. There is a list in the "Web Cluster Status" section, indicating the current group setting. Hosts in blue font are Web Clustersupported. Add: Enter the IP and name of the switch to be added. If the switch is Web Cluster-supported, click the checkbox "Web Cluster Support". After clicking Add, the input host will be added to the "Web Cluster Status" list. Delete: In the "Web Cluster Status" list, click the Del checkbox for items to be removed. After that, click Delete to refresh the list. Apply: When the list is confirmed, click Apply to submit. The web cluster menu list will be updated. The group information will be stored in the master switch. Note: "Web Cluster-supported" indicates that, if the managed host is also a Web Cluster switch, the master switch will bypass the password authentication and suppress the "Web Cluster" item in the managed host's main menu. 55 5. 5 TFTP Firmware Update The following menu options provide some system control functions to allow you to update the firmware and remote boot switch system: Install the TFTP program (such as Turbo98, or Cisco TFTP) and then execute. bin into the TFTP server's directory. Using the web management tool, select "TFTP Update Firmware". [. . . ] Remote File Name: Type the image file name. Press Ctrl + A to go back to the action menu line. Press <Save>, and the image file will begin to download. When saved successfully, the image file will have finished downloading as well. [. . . ]