User manual HAWKING HOW2R1 QUICK INSTALLATION GUIDE

[. . . ] HOW2R1 Hi-Gain TM Outdoor Wireless-N Dual Radio Smart Repeater Start Here 1. System Requirements · Pentium compatible PC or above w/ CD-ROM · 802. 11b, 802. 11g or 802. 11n Wireless Network Check Package Contents · 1 x Hi-GainTM Outdoor Wireless-N Dual Radio Smart Repeater · 2 x Hi-Gain Outdoor Antennas · 1 x PoE Injector · 1 x L-shape antenna connector · 1 x Waterproof Gasket Kit for RJ-45 · 1 x Power Cable and Power Transformer · 1 x Ethernet Cable · 1 x Mounting Kit · 1 x Setup CD-Rom 2. [. . . ] Plug in the Power Adapter When you have completed the antenna setup, plug in the included power adapter from the PoE injector in an available power outlet. 1 Securely mount and position the HOW2R1 facing a wireless Internet connection 2 Scan and connect to an outside wireless network 3. Connect to the Repeater Using a computer with wireless networking access, connect to the Repeater by searching for the wireless network named: Outdoor_Repeater 4. Open a Web Browser Using the same computer, open a web browser and type in the following web address in the web address bar: http://setup. hawkingtech. com (If the above address fails use the following address in your web browser address bar: http://192. 168. 1. 220) 5. Scan for your Network Click Scan to find your wireless Internet connection. After the list appears, select the connection and click Connect. Outdoor_Repeater Once the page loads, enter the following login information: Login: admin Password: 1234 Click Login to continue. To create a wired LAN connection, an ethernet cable may be connected to the LAN port of the PoE injector. Click Next to continue. If the signal strength is low or your network does not appear, you may need to readjust your location of your Repeater or the position of its antennas. Click Next to continue. Technical Support: 1. 888. 202. 3344 or techsupport@hawkingtech. com www. hawkingtech. com 6. Configuration Settings The Setup Wizard will now prompt you to automatically configure your IP settings (recommended) and enter a security key if the network you are connecting to is an encrypted network. Complete Setup The setup of your Repeater is now complete. If you wish to change the name (SSID) of your home/office wireless network (Outdoor_Repeater) you may do so here. If you wish to add wireless security to your home/office network you may enter one here. All users logging in through the Repeater will be required to enter this passcode. 8. Additional Setup Features The HOW2R1 has many additional setup features. To access these settings you may click on any of the main menu tabs located on the interface: General Setup, Status and Tools. IP Settings Wireless Security If you do not know the security key of the network you are connecting to, consult your network administrator. Click Finish to complete your setup then click Apply to confirm settings and reboot. [. . . ] All trademarks herein are the property of their respective owners. Apple and Mac are registered trademarks of Apple Computer, Inc. [. . . ]