Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual HILTI HDA. We hope that this HILTI HDA user guide will be useful to you.
Lastmanuals help download the user guide HILTI HDA.
You may also download the following manuals related to this product:
HILTI HDA REMOVAL (201 ko)
Manual abstract: user guide HILTI HDAINSTALLATION
Detailed instructions for use are in the User's Guide.
[. . . ] Remove the concrete core and finish drilling the hole with the stop drill bit.
2. Clean hole with compressed air or a hand air pump such that drilling debris is evacuated.
3. The anchor is inserted in the hole, so that the cone sits on the bottom of the drilled hole. [. . . ] If anchor setting time exceeds 40 seconds for M10 or M12 anchors or 60 seconds for M16 or M20 anchors, remove the anchor (see HDA removal tool Instructions). Remove the plastic thread protector cap. Secure the part to be fastened by using the conical spring washer and nut provided. Apply a torque not to exceed the maximum values given in the Specification Table. Torque is not required to set the anchor.
Setting Operation HDA-T/-TR/-TF (Through-Set Style)
1. Drill a hole to the required depth using a stop drill bit matched to the anchor, (refer to specification table and ordering info. ). If rebar is encountered, use a Hilti metric matched tolerance diamond core bit to drill through the rebar. Remove the concrete core and finish drilling the hole with the stop drill bit.
2. Clean hole with compressed air or a hand air pump such that drilling debris is evacuated.
3. The anchor is inserted in the hole, so that the cone sits on the bottom of the drilled hole. Do not remove the plastic cap which protects the threaded rod. Using the assigned setting tool and Hilti Hammer Drill (Refer to spec. Table and Ordering Info. ), the setting tool is guided over the anchor rod and engages the grooves in the sleeve. It is critical to use the specified Hilti hammer drills.
4. [. . . ] Secure the part to be fastened by using the conical spring washer and nut provided. Apply a torque not to exceed the maximum values given in the Specification Table. Torque is not required to set the anchor.
192 Hilti, Inc. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE HILTI HDA
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual HILTI HDA will begin.
HILTI HDA REMOVAL (201 ko)
