User manual HILTI PD28

[. . . ] Always keep these operating instructions together with the range meter. Ensure that the operating instructions are with the range meter when it is given to other persons. Parts of the PD 22 1. Two tripod mounting threads (standard camera thread) 9. Four metal contact points for precise measurement 1 Contents 1. [. . . ] Fold the spike out to the 90° position. The measuring reference point is changed automatically. The extended reference point is taken into account and the range meter automatically corrects the measured distance by the corresponding value. Position the end of the spike at the desired starting point and aim the range meter at the target from which the measurement is to be taken. 3. The measured value is then displayed. 19 7. Operation 7. 2. 2 Measuring from an outside corner 1. Fold out the spike to the 180° position. Position the range meter at the desired starting point, with the spike up against the corner, and aim the range meter at the target from which the measurement is to be taken. 7. 3 Measuring using the self-timer LASER + MEN - The self-timer can be of great assistance when measuring from points that are difficult to reach or impossible to reach without some form of aid. The self-timer can be started by pressing the "measure" button and the range meter then held in the difficult-to-reach position. An audible signal then indicates when the measurement has been taken successfully. I PD 22 x = 20 7. Operation 7. 4 Measuring with the aid of a target object A board, bricks or other suitable objects can be used as the target when taking a measurement from an outside edge (e. g. Press the "measure" button again to stop measuring. The result is then displayed. 1. 970 m 7. 6. 2 Continuous measurement «Tracking FAr» When «Tracking FAr» is activated, the longest measured distance is always displayed (e. g. for measuring a diagonal). Application ­ Determining the longest distance between two objects without having to fix the point (e. g. diagonals of a room, for checking right angles). Switch on the range meter and then press the MENU button. Select the FAr function by pressing the or + buttons. Press the "measure" button. ­ 6. The value displayed is updated continuously. Move the range meter until the highest value is displayed (longest distance). Press the "measure" button again to stop measuring. The result is then displayed. 3. 746 m 26 7. [. . . ] Most of the materials from which Hilti machines or appliances are manufactured can be recycled. The materials must be correctly separated before they can be recycled. In many countries, Hilti has already made arrangements for taking back old machines and appliances for recycling. Ask Hilti customer service or your Hilti representative for further information. [. . . ]