User manual HILTI WSR 36-A

[. . . ] WSR 36-A Bedienungsanleitung Operating instructions Mode d'emploi Istruzioni d'uso Manual de instrucciones Manual de instruções Gebruiksaanwijzing Brugsanvisning Bruksanvisning Bruksanvisning Käyttöohje de en fr it es pt nl da sv no fi el 1 1 2 34 5 +" +± + 9 6 87 2 3 3/5 4 6 1 4 5 6 2/4 min. 6mm 3/5 3 1 2 4 1 6 5 2 4 3 7 6 7 8 10 9 9 8 9 1 1 10 2 11 min. 40mm 12 1­ 6 3 2 13 WSR 36A cordless reciprocating saw It is essential that the operating instructions are read before the power tool is operated for the first time. Always keep these operating instructions together with the power tool. Ensure that the operating instructions are with the power tool when it is given to other persons. Contents 1. EC declaration of conformity Page 15 16 18 18 19 22 24 25 26 26 27 27 1 These numbers refer to the corresponding illustrations. [. . . ] thickness for which the saw is designed and do not use unsuitable saw blades (reciprocating saw blades of the wrong size or not equipped with a ¹/" connection end). 5. 2. 4 Battery tool use and care a) Observe the special instructions applicable to the transport, storage and use of Liion batteries. b) Do not expose batteries to high temperatures or fire. c) Batteries must not be opened or dismantled, squashed, heated to temperatures over 100°C or incinerated. A risk of fire, explosion or injury through contact with caustic substances may otherwise result. d) Do not use batteries other than those approved for use with the applicable power tool or appliance. Use of other batteries or use of the battery en 21 en for purposes for which it is not intended presents a risk of fire and explosion. e) Do not charge or continue to use damaged batteries (e. g. batteries with cracks, broken parts, bent or pushedin and/or pulledout contacts). f) Use only the Hilti chargers listed under "Accessories". g) Ensure that the outer surfaces of the battery are clean and dry before inserting it in the corresponding charger. Read the operating instructions for the charger for further information about the charging procedure. 5. 2. 5 Electrical safety may become live, for example, when an electric cable is damaged accidentally. This presents a serious risk of electric shock. 5. 2. 6 Work area safety Ensure that the workplace is well ventilated. Exposure to dust at a poorly ventilated workplace may result in damage to the health. 5. 2. 7 Personal protective equipment Before beginning work, check the working area (e. g. using a metal detector) to ensure that no concealed electric cables or gas and water pipes are present. External metal parts of the power tool The user and any other persons in the vicinity must wear suitable eye protection, a hard hat, ear protection, protective gloves and breathing protection while the power tool is in use. 6. Grip and pull the saw blade to check that it is locked in position. Turn the blade holder locking sleeve counterclockwise and hold it pressed down. Pull the blade forward out of the blade holder. [. . . ] Disposal CAUTION Improper disposal of the equipment may have serious consequences: The burning of plastic components generates toxic fumes which may present a health hazard. Batteries may explode if damaged or exposed to very high temperatures, causing poisoning, burns, acid burns or environmental pollution. Careless disposal may permit unauthorized and improper use of the equipment. This may result in serious personal injury, injury to third parties and pollution of the environment. [. . . ]