Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual HITACHI 0662. We hope that this HITACHI 0662 user guide will be useful to you.
Lastmanuals help download the user guide HITACHI 0662.
You may also download the following manuals related to this product:
HITACHI 0662 QUICK INSTALLATION GUIDE (11 ko)
Manual abstract: user guide HITACHI 0662DATASHEET
Detailed instructions for use are in the User's Guide.
[. . . ] 0662a10. txt
3 1/2-INCH 1 GB LOW PROFILE AT DISK DRIVE 0662 MODEL A10 ______________ AN OEM OFFERING FROM IBM The award-winning IBM 0662 disk drive is now available to users with AT-based systems. [. . . ] When attached to a Local Bus (VESA or PCI), data rates to 13 MB/sec are supported, making the Model A10 an excellent choice for high-performance workstation applications. Using the Duplex Mode, the 0662 Model A10 is downward compatible with existing AT BIOS systems that cannot address greater than 526 MB. In this mode, the system addresses the drive as if it were two 500 MB drives No additional device drivers are required. HIGHLIGHTS 1-inch high, low-profile 3 1/2-inch form factor 3-disk design LBA Addressing Standard P10 Data Transfers (Mode 0-3) and Mode 4 DMA Data Transfer Mode 3 Duplex Mode (2 x 500 MB) Master and slave modes supported 500, 000 hours projected MTBF PRDF Data Channel (PRML with digital filter) Supports mounting in any orientation Low command overhead LED driver supported 512 KB multisegmented data buffer Dedicated servo with thermal compensation Read ahead caching Write caching (volatile) Automatic sector reallocation Automatic power management
PRODUCT DESCRIPTION _______________________________________________________________________________ 3 1/2" 1 GB Low Profile 0662 Standard PIO 0662 Enhanced AT Disk Drive & DMA ATA/IDE _______________________________________________________________________________ Configuration Device Capacity Formatted (512 bytes) 1052 MB
Page 1
0662a10. txt
Number of Disks 3 Number of Heads 6 Recording Surfaces 5 Tracks per Surface ID 1120, OD 3016 Track Density 4077 TPI Areal Density 354/319 Mb/sq in Recording Density 86, 900/78, 200 BPI Bytes per Sector 512 Bytes Disk Type Thin Film Channel PRML Actuator Type Rotary VCM Head Type Magneto-resistive (MR) _______________________________________________________________________________ Performance Media Data Rate Banded 5. 0-6. 0 MB/sec Access Time (Population Average) Average Read 8. 5 msec Average Write 10. 1 msec Track to Track Read . 6 msec Full Stroke Read 16. 5 msec Rotational Speed 5400 RPM Command Overhead Typical 120 microseconds Data Transfer Rate (Max) PIO 8 MB/sec 13 MB/sec DMA 8 MB/sec 13 MB/sec Buffer Size 512 KB _______________________________________________________________________________ Reliability MTBF Projected power-on hours 500, 000 CDF (1) 5. 8% at 500 POH Recoverable Read Errors Population Average < 10 in 10 to the 11th Non-Recoverable Read Errors Population Average < 10 in 10 to the 15th Seek Errors < 10 in 10 to the 8th Buffer Memory Parity Yes _______________________________________________________________________________ Power Requirements +5 VDC Idle . 63 Amps +12 VDC Idle . 33 Amps +12 VDC Start-up 1. 58 Amps Idle Power 7. 02 Amps _______________________________________________________________________________ Physical Size Dimensions Length 146. 0 mm Height 25. 4 mmm Width 101. 6 mm Weight 0. 5 kg Mounting Industry Standard/All Orientations _______________________________________________________________________________ Environmental Characteristics Operating Non-Operating _______________________________________________________________________________ Ambient Temperature 5 to 55 degrees C -40 to 65 degrees C Relative Humidty Non-Condensing 5% to 90% 5% to 95% Shock 11 ms 10 G 60 G Vibration 1 G (2) 2G
Page 2
0662a10. txt
Audible Noise Population Average - Idle < 34 dba @ 1 M NA _______________________________________________________________________________ (1) Cumulative Distribution Failure rate. At 500, 000 hours MTBF, 5. 8% of the files are projected to fail in 5 years running at 500 Power On Hours per month. (2) 1 G swept sine vibration is for frequencies between 5 and 200 Hz. Levels above 200 Hz vary with frequency and orientation, and are available upon request. Product Description data represents IBM's design objectives and is provided for comparative purposes; actual results may vary depending on a variety of factors. [. . . ] For more information about this product, please contact: IBM Corporation Storage Systems Division 5600 Cottle Rd Bldg 097, Dept P32 San Jose CA 95193
Page 3 [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE HITACHI 0662
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual HITACHI 0662 will begin.