User manual HITACHI 22LD4500UK

[. . . ] Instructions for use GB 22LD4500 Contents Wiring The Plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Remote Control Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Control Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] This is intended for making video recordings of programmes when you are out. If a single programme is to be recorded, the TV can be left switched to the required channel and the timer set on the VCR. However, if two or more programmes on different channels are to be recorded then the timer is set as well, to select the required channel when it is needed. Display the Main Menu by pressing the "M" key and highlight and select the Timers line to display the Timer menu screen. Up to five separate timer events can be set and each is displayed in the Timer screen, showing the event number, the channel to be selected, the start time, end time, date and the mode - whether that event is active (and will be acted on) or not. MENU SE LECT i To set an event, highlight its mode button using the " " or " "keys and press "SELECT" key to display the timer entry window. Here the five settings of channel name, start time, end time, date and frequency mode can be set. You can move freely between each setting using the " " and " " keys. The channel name is set using the " " or " " keys to display the channel which broadcasts the programme to be recorded. The start time, end time and date are each set with the number keys on the remote control in 24-hour format. The frequency mode determines how often the TV operates this event and is set with the " " or " " keys to be either Once, Daily or Weekly. . 36 advanced operation Hint If an invalid number for the start or end times or the date is entered, "Entered time is not valid. " message is displayed on the screen. Pressing "M" or "SELECT" key returns to the Timer screen with the settings in place in the timer event list. The event mode is automatically set to Active and you can now return to normal viewing (press the "M" key) and at the appointed time the TV will switch over to the required channel and at the end of the event, switch the TV to previous channel. When the Timer screen is displayed, any event can be set to be Inactive (so it will not occur) or the channel, times and frequency mode altered by highlighting the event's Mode button and pressing "SELECT" key as before. You can exit the Timer screen and return to normal TV viewing by pressing "M" key. Hint If you are watching digital terrestrial TV at the time the timer event starts, a message is flashed onto the screen announcing that the TV is 'Switching to timer channel' so you understand what is happening. Event Timer: If timer action occurs when the TV is in stand-by mode, the TV turns on but no picture is seen and no sound is heard. Selected digital channel will be at the Scart-2 output. The selected channel can be watched or copied via Scart-2. If timer action occurs while tv is watched, tv switches to the selected channel. When timer expires, the TV switches to the channel which it is switched from. While watching Analog TV broadcasting, you can get Digital TV broadcasting from EXT-2. For this option you must set Av-2 Output in Feature menu to DIGITAL mode. (See Analog TV section - Feature menu) Start and end time of Digital TV programmes can be set in Timers menu. While watching Digital TV broadcasting, you can get Analog TV broadcasting at that time from EXT-2. For this option you must set Av-2 Output in Feature menu to TV. (See Analog TV section - Feature menu) 37 RE-INSTALLATION Although your TV will not lose its settings or stored channels when switched off, you may wish to re-install the TV because you have moved to a different area with different broadcast frequencies, you wish to reinstate a channel previously deleted from the channel list, or you want to watch new channels which have started broadcasting. Press the "M" key to display the Main Menu and using the " " or " " keys, highlight the Installation line and press "SELECT" key to display the Installation Menu. You can either perform a First Time Installation, effectively resetting the TV to its exfactory condition, or just search for channels. 38 advanced operation FIRST TIME INSTALLATION To reset the TV, highlight the First Time Installation line in the menu and press "SELECT" key. [. . . ] · Check that Video Card is firmly seated in card slot of Computer motherboard. · Check that the Brightness and/or the Contrast adjustments of the Display have not been turned down to minimum levels. Sound You can not hear any sound. Did you perhaps interrupt the sound, pressing " " key?Are external speakers connected to the TV? [. . . ]