User manual HITACHI 32LD8700CA

[. . . ] Instructions for use Bedienungsanleitung GB D F I 32LD8700CA Notice d'utilisation Istruzioni per l'uso Remote Control Buttons . . . . . . . . . . . . . . . . . . . . . . . 2 LCD TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] If the menu lock is disabled, there will be free access to the menu system. Main Menu: Main menu is accessible only with the correct lock key. So the user cannot add, delete, rename, move channels, cannot set timers. Installation: Installation menu is locked, so the user cannot add channels. Changes will be updated after exiting Configuration Menu. Set Lock Key: Also in this menu you can change the lock key and set/change parental lock mode. Time Settings In the configuration Menu, highlight the Time or buttons. Settings item by pressing Press OK and Time Settings sub menu will be displayed on the screen: In the configuration menu, highlight the Reor ceiver Upgrade item by pressing buttons and press OK button to start upgrade process. The following menu appears on the screen. After the search progress is completed, the message Completed searching for upgrade. No new software was found appears on the screen if no new software is found. - 19 - Timers Display the Main Menu by pressing the button. Highlight the Timers line by pressing or buttons and press OK button to display the Timer menu. freely between each setting using buttons. or or but The channel type is set using tons. It enables displaying only the selected type channels. The channel name is set using or buttons to display the channel which broadcasts the programme. The start time, end time and date are each set with the number buttons on the remote control in 24-hour format. The frequency mode determines how often the receiver operates this event and is set or buttons to be either Once, with the Daily, or Weekly press OK button to complete setup. 0DLQ 0HQX Up to five separate timer events can be set and each is displayed in the Programme Timers screen, showing the event number, the channel to be selected, the start time, end time, date and the mode - whether that event is active (and will be acted on) or not. +LQW , I DQ LQYDOLG QXPEHU IRU WKH VWDUW RU HQG WLPHV RU WKH GDWH LV HQWHUHG ³(QWHUHG WLPH LV QRW YDOLG´ PHVVDJH DSSHDUV RQ WKH PHQX RECORDING FROM IDTV Connect your VCR to AV2 via a scart lead. Set the AV2-OUT in the feature menu to DDT, as illustrated and described on page 25. Set your TV to standby using the remote control. To set an event, highlight its mode using or buttons and press OK button to display the timer entry window. Set your VCR to correspond with the time set on your TV and select external input (refer to your VCR instruction book). If you switch on your TV whilst the timer recording is active and then switch back to standby, the timer recording will be cancelled; the timer setting will be deleted and the desired programme will not be recorded. Here the six settings of channel type, channel name, start time, end time, date and frequency mode can be set. You can move - 20 - TV Setup To be able to go through TV functions, you can use this item. [. . . ] UK - I 055, 25 Mhz Cancel Installation Of The TFT TV To The Wall GB 1- To install the TFT TV on the wall, first of all, foot assembly should be removed. Unscrew the 6 screws (M4 x 12) that attach the foot assembly to the TFT panel and remove the foot assembly from the TFT panel. 2- Decide the place on the wall where the TFT panel would be placed. Fix the wall mounting stencil on the wall. [. . . ]