User manual HITACHI 32LD8700UB

[. . . ] Contents Remote Control Buttons . . . . . . . . . . . . . . . . . . . . . . . . 2 LCD TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] · Press the " " button to display the Main Menu and use or button to highlight the Language line and press the "OK" button. Main Menu Channel List Installation Configuration Timers Language TV Setup Common Interface · Here the five settings of channel name, start time, end time, date and frequency mode can be set. You can move freely between each setting using the or buttons. or · The channel name is set using the button to display the channel which broadcasts the programme. · The start time, end time and date are each set with the digit buttons on the remote control in 24-hour format. · The frequency mode determines how often the receiver operates this event and is set with the or button to be either Once, Daily, or Weekly. If an invalid number for the start or end times or the date is entered, "Entered time is not valid" message appears on the menu. RECORDING FROM IDTV Connect your VCR to AV2 via a scart lead. Set the AV2-OUT in the feature menu to DDT, as illustrated and described on page 20. Set your TV to standby using the remote control. Set your VCR to correspond with the time set on your TV and select external input (refer to your VCR instruction book). If you switch on your TV whilst the timer recording is active and then switch back to standby, the timer recording will be cancelled; the timer setting will be deleted and the desired programme will not be recorded. · Use the or button to highlight the soundtrack language required and press the "OK" button. Normal viewing, with the required language soundtrack, can be resumed by pressing the " Languages English " button. · If the programme has no alternative language soundtrack broadcast, the Language Menu will not be available, but a message, "No Multi Language Available" is displayed briefly. TV Setup To be able to go through TV functions, you can use this item. The digital TV Setup menu screen is accessed from the main menu. Press the " " button to display the main menu and use or button to highlight "TV Setup", press the "OK" button to display TV Setup menu screen. Main Menu Channel List Installation Configuration Timers Language TV Setup Common Interface - 16 - Detailed information about Sound, Picture and Feature menus are in AnalogueTV Menu System section on page 17. 3. Connect the TV to the mains supply, switch on and then wait for few moments until the card is activated. · Some CAMs may require the following set up. Please set the CAM by entering the IDTV menu, Common Interface then pressing the "OK" button. (CAM set up menu is not displayed when it is not required. ) · To see the viewing contract information: Enter IDTV; press the " " button, then highlight Common Interface and press the "OK" button. · When no module is inserted, "No Common Interface module detected" message appears on the screen. · Refer to the module instruction manual for details of the settings. Common Interface · Press the " " button to display the Main Menu and use the or button to highlight the "Common Interface" line and press the "OK" button. Main Menu Channel List Installation Configuration Timers Language TV Setup Common Interface It is required to subscribe to a pay channel company to view the pay channels of the Digital Terrestrial broadcasting. Obtain the Conditional Access Module (CAM) and the Viewing card by subscribing to a pay channel company, then insert those to the Television using the following procedure. Switch off the TV and unplug from the mains. [. . . ] If this does not work, call the service personnel; never attempt to repair it yourself. No Picture Is the aerial connected properly?Are the plugs connected tightly to the aerial socket?Are suitable plugs used to connect the aerial?If you are in doubt, consult your dealer. [. . . ]