User manual HITACHI 35TX69K

[. . . ] TABLE OF CONTENTS HITACHI SOLID STATE COLOR TV 35TX69K 1 OPERATING GUIDE Your new HITACHI COLOR TV incorporates a host of features designed to give you excellent performance if you follow the instructions in this manual. Please read the following instructions and "IMPORTANT SAFEGUARDS" notice before turning on your TV for the first time. This television receiver will display television closed captioning ( accordance with paragraph 15. 119 of the FCC rules. TABLE OF CONTENTS TABLE OF CONTENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Press the CH button on the TV to start the autodemonstration. Press the POWER button on the TV again to end the autodemonstration. · CLOSED CAPTION When CLOSED CAPTION is highlighted in purple, press ENTER to see the following display: Closed captions are the dialogue, narration, and/or sound effects of a television program or home video which are displayed on the TV screen. Your local TV program guide denotes these programs as DISPLAY: ON/OFF is to turn the . display on or off. MODE: CAPTION is for the program you are viewing. MODE: TEXT is for additional information such as news reports or a TV program guide. This information covers the entire screen and viewing the TV program is not possible. TEXT may not be available with every program. CHANNEL: 1 is used for the primary language (usually English). CHANNEL: 2 is sometimes used for a second language (may vary by region). Use the CURSOR UP or DOWN to highlight the function to change, press ENTER to change the function, and press MENU to exit. NOTE: The word MUTE will not be displayed if the DISPLAY is ON. If you do not have sound, make sure MUTE is not set. 19 -SET UP- FUNCTIONS · INITIAL SETTING Select -SET UP- and -INITIAL SETTINGS- when setting your TV up for the first time. Use the CURSOR UP / DOWN or a NUMBER from the remote to highlight the functions desired. · AIR / CABLE Select this function to change between regular VHF/UHF broadcasting (AIR) and cable TV (CATV1 or CATV2) Press the CURSOR buttons to highlight the correct AIR/CABLE mode and press MENU to exit. Reception channels for each mode are shown at the right. Refer to your cable or TV guide for channel identification standards. If certain CATV channels are poor or not possible in the CATV1 mode, set -AIR/CABLEselect to CATV2. · AUTOPROGRAM This feature will automatically store active TV channels in CHANNEL MEMORY. This will allow you to skip over unused channels when using the CHANNEL UP ( ) or DOWN ( ) buttons. 20 -SET UP- FUNCTIONS If the MENU button is pressed while the autoprogramming function is engaged, programming will stop. See CHANNEL MEMORY to add or erase additional channels. · CHANNEL MEMORY Use this function after AUTOPROGRAM to add or erase additional channels to the remote control CHANNEL , buttons. Add or erase additional channels while still in CHANNEL MEMORY using the buttons or number buttons and then add or erase using the CURSOR CHANNEL , , buttons. NOTE: For CLU-692GR remote controller, slide multi-page select switch from MENU/CATV mode to TV mode to use channel , buttons or number buttons. The MENU/CATV mode works on MENU, ENTER, and cursor up, down, left and right. · CLOCK SET Use the same remote control buttons as shown in previous examples to display the clock setting, press MENU, 1, ENTER, 2, ENTER, 4, ENTER. Once the proper time is set (including AM or PM), press MENU to start. · CHANNEL CAPTION Use this feature to give channel names to up to 30 channels for each antenna source (ABC, PAY1, CMDY, etc. ). 21 -SET UP- FUNCTIONS To display this function, press MENU, 1, ENTER, 3, ENTER. Press the CURSOR , to select letters. [. . . ] When the power button is set to OFF, the OFF TIMER is released. indication, volume indication and OFF TIMER indication are not displayed simultaneously. To operate your TV, point the Remote transmitter at the remote sensor of the TV. NOTES 1. To operate your TV, be sure to point the Genius Remote at the remote sensor on the television. [. . . ]