User manual HITACHI 37LD8700U

[. . . ] Instructions for use GB 37LD8700U Contents Remote Control Buttons . . . . . . . . . . . . . . . . . . . . . . . 2 LCD TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] The CAM or the TV terminal may be damaged if the CAM is forcefully inserted. Refer to the module instruction manual for details of the settings. Menu System Your TV has been designed with a menu system to provide easy manipulation of a multifunction system. Press Press the _ / ` button to select a menu title and then a / b button to select a menu item and _ / ` or OK button to enter the menu item. button to return to the previous Picture menu By pressing _ / ` button, select the first icon. Picture menu appears on the screen. Mode 3. Connect the TV to the mains supply, switch on and then wait for few moments until the card is activated. Press _ / ` button to choose one of these options: Natural, Dynamic and Cinema. - 17 - Picture mode can be changed directly by button. pressing the Contrast By pressing a / b button, select Contrast. Contrast level can be adjusted between 0 and 63. Brightness By pressing a / b button, select Brightness. Brightness level can be adjusted between 0 and 63. Sharpness By pressing a / b button, select Sharpness. Sharpness level can be adjusted between 0 and 31. Colour By pressing a / b button, select Colour. Colour level can be adjusted between 0 and 99. Hue This item is displayed in picture menu when the TV receives an NTSC signal. Hue level can be adjusted between -31 and 31. Colour Temp By pressing a / b button, select Colour Temp. Press _ / ` button to choose one of these options: Cool, Normal and Warm. Noise Reduction This item is used to reduce the image noise and improve the picture quality at weak signals. By pressing a / b button, select Noise Reduction. Press _ / ` button to set Noise reduction level to Off, Low, Medium or High. Film Mode Films are recorded at a different number of frames per second to normal television programmes. By pressing a / b button, select Film Mode. [. . . ] 055, 25 Mhz Cancel important note. Once the TV has found all your local stations, they are then automatically assigned a programme number and name, if available from the broadcast. 50086470 Installation Of The TFT TV To The Wall *% 1- To install the TFT TV on the wall, first of all, foot assembly should be removed. Unscrew the 6 screws (M4 x 12) that attach the foot assembly to the TFT panel and remove the foot assembly from the TFT panel. 2- Decide the place on the wall where the TFT panel would be placed. Fix the wall mounting stencil on the wall. [. . . ]