User manual HITACHI 42PD8900

[. . . ] 1 INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 About This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Trademark Credits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 About Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Select color system from 5 different modes. Setup hint Sort Teletext Language 23 MENU OPERATION (continued) ENGLISH System 1 Return Setup Menu (AV mode) With this menu, you can select or adjust the condition of the input signals from each terminal. Setup System Color System Video Input Select Set Selected Items System 1 System System 2 Auto PAL System 1 Color system AV1~AV5 SECAM NTSC4. 43 NTSC3. 58 Auto System 2 NTSC-M PAL-M PAL-N Auto Video Input AV1, AV2 HDTV SDTV/DVD Setup hint Do not change the original setting. (System1: Europe/Asia, System2:North America) Composite and S-video input only. Select the color system depending on the input signal. In case that the input signal has too much noise, the signal level is too low, or the operation is unstable in [Auto], select the system according to the color system of the input signal. Composite and S-video input only. Select the colorimetry depending on the input signal. In case that the input signal has too much noise, the signal level is too low, or the operation is unstable in [Auto], set this to match the input signal. Component Input only. 24 MENU OPERATION (continued) Setup Menu (RGB mode) With this menu, you can adjust the display condition of the image which is inputting from the RGB terminals. By pressing button at the bottom of the 1st Setup menu page, the 2nd Setup menu page will appear on the screen. Setup Auto Adjust Adjust Horizontal Position 0 Vertical Position +31 Horizontal Clock ­20 Clock Phase 10 Reset Reset Select Return Exit Setup Input Level Frequency Display WVGA Type WXGA Mode Vertical Filter Frequency Mode Select Set 0. 7V Off Off Off On PC Return Selected Items Setup hint Adjust Horizontal Position, Vertical Position, Horizontal Clock, and Clock Phase automatically. Press OK button to start auto adjustment. The message "Auto Adjusting" is displayed. Depending on the type of the signal, there is a possibility that the display may not be adjusted in its optimum condition with this function. This displays the white pattern to recover from the image retention. This can change the color of sidebars showing up in normal mode. (Off:gray, On:black) It is recommended to set Off to reduce image retention. Please note that it is not available while operating Photo Input function. During AV input, this helps to reduce power consumption when there is no video signal. In case of selecting AV input terminal which does not have signal input, it changes the power status to power save mode in AV1/AV2 and standby mode in other AV input. (See 52 in details. ) This is the useful function to watch the program in both still and active pictures. (See 44 in details. ) Split: half sized images Strobe: thumbnail sized images You can set the display size for TV / AV input screen appearing first when turning the main power On. This can reduce the power consumption. Screen Saver Screen Wipe Off Black Side Panel On Off Video Power Save On Split Freeze Mode Strobe Panoramic 4:3 Full Off On Default Zoom Eco Mode 27 MENU OPERATION (continued) ENGLISH 28 Function Menu (continued) Selected Items Luminance Manager Off On 1 Picture Size 2 Setup hint This helps to avoid the image retention such as station logo by lowering the brightness of 4 corners. In case that the image from TV signal (especially CATV) has a blackened gap in either or both side during Panoramic mode, select [2] so that it can make up for the gap. This is not available when displaying "Cinema" size. [. . . ] (PC input mode only) AAAAA Adjust "Horizontal Clock" and "Clock Phase". 25 Adjust "Horizontal Clock". 25 The part of the image is lacking. (PC input mode only) Check if the "Screen Saver" is OFF. button Check the Signal status of the PC by pressing on the remote control. If the Vertical Frequency of the PC is set to less than 85Hz, adjust its level higher (up to 85Hz). [. . . ]