User manual HITACHI AX-M136I

[. . . ] Important Cautions Thank you for purchasing this system. Please read these operating instructions before operating the unit. The operating instructions should be retained for future reference. For your safety CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Laser Product This product is equipped with low power laser equipment. [. . . ] * Press and hold the Scan button (INTRO/SCAN) for 2 seconds or more, the system will start full scan to search for all available Band lll channels again automatically. * Press the Scan button (INTRO/SCAN) briefly, the system will start a quick scan process to search for Band lll channels again automatically. Press and hold the Play/Pause button (BF) for more than 2 seconds to enter the manual tuning mode. Press the Reverse/ Fast Forward buttons (D/C) to select your desired DAB channels backward/forward. Press the Play/Pause button (BF) to confirm and tune to your selected channel. Programming DAB Stations You can save up to 20 DAB stations in the system memory. Press the Reverse/ Fast Forward button (D/C) to select your desired DAB channels. Press the Play/Pause button (BF) to confirm, and tune to your selected channel. Press the Program button (PROG) and then press the Previous/ Next buttons (H/G) to select a location for storing your desired station. You can also use the Number buttons (0-9) to input a number directly and tune to the service associated with this number. If the number is larger than 10, press the Number button (10+) once or more to select the first digit you want and then use the Number buttons (0-9) to input the second digit. Press the Program button (PROG) again for confirmation until "P # SAVED"(# indicating the preset number your selected) display. * * * Tuning to Preset DAB Stations Press the Previous/ Next buttons (H/G) until the desired preset station is displayed. The system will tune to the selected station automatically. You can also use the Number buttons (0-9) to input a number directly and tune to the service associated with this number. To input a number larger than 10, press the Number button (10+) once or more to select the first digit you want and then use the Number buttons (0-9) to input the second digit. DAB Information Display You can view the DAB service information in the following modes. Depending on the DAB radio station you are tuning to, some information modes may be unavailable. Press the Display button (DISPLAY) repeatedly to view the following information. DLS (Dynamic Lable Segment) Signal Strength PTY (Program Type) Data Rate and Mode Ensemble Name Date and Clock - 12 - Resetting the system 1. In the DAB mode, press and hold the Display button (DISPLAY) until "SYS RESET" appears on the Vacuum Fluorescent Display (VFD). Press the Play/Pause button (BF) to confirm. The system will clear its internal memory and automatically start a quick scan all over again. [. . . ] * The volume automatically comes on at level 12. To confirm the daily time When you press the Timer button (TIMER) on the remote control in standby mode, the daily time is displayed. Wait for a few seconds until the display returns to the time display. To cancel the daily timer setting Repeat the previous steps for setting the daily timer until "OFF" is displayed. [. . . ]