User manual HITACHI AXF300E

[. . . ] To clean the cabinets and panels when dirty, clean off dirt on the surfaces with a soft, dry cloth. Never use thinner, benzene or alcohol, as these will damage the surface finish. Protect the unit against excessive heat (e. Discs which can be played on the CD player have the following mark on them: · Be careful not to damage the power supply cord. [. . . ] Fäst en anslutning av F-typ till koaxialkabeln och anslut sedan antennen till terminalen FM COAX (75ohm). Check that the following parts are included in the package: · Changer (DA-R100E) CD tray Play/Pause (:J) button Stop (L) button CD skip forward search (f) button CD skip backward search (g) button DISC button c Open/Close (123) button Display window ON/STANDBY button Tape control buttons are for Hitachi model DR100 only. MD control buttons and CD Edit button are for Hitachi model HMD-R50 only. This unit can be set to ecology mode for power saving in standby mode. To set to STANDBY mode when the unit is in ECO-ON mode. Note: ECOLOGY mode cannot function when timer is ON. To set to STANDBY mode when the unit is in ECO-OFF mode. Repeat steps 1 - 6 to preset other stations. After step 5, station name can be entered. Repeat current track Wiederholen des aktuellen Titels Répétez la piste actuelle E µµ Repetición de la pista actual Ripetizione del brano corrente Huidig muziekstuk herhalen Upprepa aktuellt spår Gentag aktuelt spor Soivan raidan kertaus Gjenta gjeldende spor Repeat all discs Alle CDs wiederholen Répétition de tous les disques Repetición de todos los discos Per ripetere tutti i dischi Alle discs herhalen Upprepa alla skivorna Gentag alle plader Kaikkien levyjen jatkuva soitto Gjenta alle platene Cancel repeat Wiederholfunktion löschen Annulation de la répétition Cancelar repetir Annulla la ripetizione Herhaalfunctie annuleren Slopa repeteringen Annuller genafspilningsfunktionen Peruuta toistaminen Annuller gjenta This is only operational in combination with the D-R100. Use this function to automatically edit the CD tracks according to the preset length (time) of the cassette tape. NOTE: To set a time other than the preset, input the time when "C---" is displayed. When using CD EDIT function with a CD disc containing 21 tracks or more, only 20 tracks can be edited. If you wish to record all the tracks, use manual recording or CD SRS Recording on D-R100. The edited recording mode is programmed so that the remaining time of the unrecorded tape is minimized and the last programmed track may be out of sequence. Load the cassette tape onto which you want to record in the tape deck, with side A on the top before starting the editing procedure. Note that even if the tape is slightly longer than the disc's total playing time, it may not be possible to record all the tracks on sides A and B. If you wish to record all the tracks, use manual recording or CD SRS Recording. Blank segments of 5 seconds are automatically created between the recorded tracks so the displayed time and the actual remaining time on the tape slightly differ. After step 5 on page 47, follow the steps below. To receive the next RDS station, repeat steps 2 and 3. Note: If a station does not have RDS, the PANEL mode cannot be changed. [. . . ] Total numbers of tracks not displayed when disc is loaded. Nothing happens when operating buttons are pressed. Disc stops in the middle of a track and will not play properly. Signals on the power cord are being modulated by the power source frequency. [. . . ]