User manual HITACHI AXM3E

[. . . ] Pred pouzi tím si dokladone precitajte tieto pokyny. opening Do not cover any vents and make sure that there is a space of several centimetres around the unit for ventilation. Features and scart output Index to Parts and Controls Speaker System Set up Connect the supplied speaker system using the supplied speaker cords by matching the colours of the terminals. Note: Attach loudspeaker wires to the unit. Left speaker:connect the red wire to terminal "L+" and connect the black wire to terminal "L-". Right speaker:connect the red wire to terminal "R+" and connect the black wire to terminal "R-". Avoid short circuiting your amplifier Please ensure that the bare + and ­ wires don't touch each other when connected to the speaker terminals, as your system may be damaged. Note Be sure to match the speaker cord to the appropriate terminal on the components: + to + and - to -. If the cords are reversed, the sound will be distorted and will lack of bass. [. . . ] If you use speakers with low maximum input rating, adjust the volume carefully to avoid excessive output on the speakers. 15 TV and Optional Component Set up Required cords Video connection wire for connecting a TV set(supplied) Yellow Yellow Red White Audio connection wire(Not included) When connecting a wire, be sure to match the colour-coded Red White pins to the appropriate jacks on the components. Note: When using the S-VIDEO OUT jack instead of the VIDEO OUT jack for better picture clarity. Your TV monitor must also be connected via a S-VIDEO INPUT jack. When using the SCART OUT connector instead of the VIDEO OUT jack. Your TV monitor must also be connected via a Scart socket. The Scart terminal contains separate video signals and stereo audio signals. You can connect the OPTICAL output to another amplifier with Dolby Digital decoder. Do not connect the AC power socket to the wall outlet before the system connection is completed. Connecting the AC Power Cord Note Power Requirements: AC 230V, 50Hz. Power that differs from above value will damage the system or cause the system to work abnormally. Before connecting the AC power cord(main lead) of this system to a wall outlet, connect the speakers to the system. Note: Some discs may not respond to the zoom feature. Zooming does not work on subtitles or menu screens included on DVDs. The magnification level varies depending on the TV DISPLAY selection in the SETUP menu. 1 Off 2 3 26 Special Functions Menu Selection When playing a DVD, press MENU to return to the program menu. In the Set up Menu, press MENU to return to the main menu or play mode. At any time press MENU to cancel the current OSD or some menus Note This function is subject to the disc Angle Selection Some DVD discs contain scenes which have been shot simultaneously from a number of different angles. For these discs, the same scenes can viewed from each of the different angles. (The recorded angles differ from disc to disc. ) 1. [. . . ] For these discs, the same scenes can viewed from each of the different angles. (The recorded angles differ from disc to disc. ) 1. While playing a title shot from different angles, the angle mark appears on the TV screen. [. . . ]