User manual HITACHI C2059FS

[. . . ] After reading them, store them in a safe place for future reference. Heed all the warnings and cautions in the manuals or on the product. Follow all the instructions in the manuals or on the product. NOTE · In this manual, unless any comments are accompanied, "the manuals" means all the documents provided with this product, and "the product" means this projector and all the accessories came with the projector. Contents First of all . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] In a couple of power supply connection, the POWER indicator will light up in steady orange. Please remember that when the DIRECT ON function activated, the connection of the power supply make the projector turn on. AC IN Power cord WARNING Please use extra caution when connecting the power cord, as incorrect or faulty connections may result in fire and/or electrical shock. · Only use the power cord that came with the projector. If it is damaged, consult your dealer to get a new one. · Only plug the power cord into an outlet whose voltage is matched to the power cord. The power outlet should be close to the projector and easily accessible. Remove the power cord for complete separation. · Never modify the power cord. Turning on the power and the outlet. Make sure that the POWER indicator is steady orange. Press the STANDBY/ON button on the projector or the remote control. The projection lamp will light up and the POWER indicator will begin blinking in green. on the projector STANDBY/ON button POWER indicator ENGLISH 2. VIDEO MY SOURCE/ COMPUTER DOC. CAMERA ASPECT AUTO SEARCH BLANK MAGNIFY FREEZE ON PAGE UP VOLUME OFF DOWN KEYSTONE MY BUTTON 1 2 MUTE POSITION MENU ENTER ESC RESET 3. WARNING Do not touch around the lamp cover and the exhaust vents during use or just after use, since it is too hot. Remove the power cord for complete separation. The power outlet should be close to the projector and easily accessible. NOTE · Please power off the projector after any connected devices are powered off. · This projector has the AUTO OFF function that can make the projector turn off automatically. For more information, please see the "Operating Guide" in the CD. 11 Replacing the lamp A lamp has finite product life. Using the lamp for long periods of time could cause the pictures darker or the color tone poor. Note that each lamp has a different lifetime, and some may burst or burn out soon after you start using them. Preparation of a new lamp and early replacement are recommended. To prepare a new lamp, make contact with your dealer and tell the lamp type number. Type number : DT01021 and unplug the power cord. [. . . ] NOTE · The information in the CD-ROM is subject to change without notice. · No responsibility is taken for any obstacle and defect to hardware and software of your PC as a result of the use of the CD-ROM. · All or Any part of the information in the CD-ROM must not be copied, reproduced or republished without notice to our company. 15 ENGLISH Specifications Item Product name Liquid Crystal Panel Lamp Speaker Power supply Power consumption Temperature range Size Weight (mass) Liquid crystal projector 786, 432 pixels (1024 horizontal x 768 vertical) <CP-X2011> 190 W UHP <CP-X2510Z, CP-X3010Z, C2059FS, CP-X3011, CP-X3511> 210 W UHP 8 W x2 (monaural) <CP-X2011> AC 100-120 V/2. 9 A, AC 220-240 V/1. 6 A <CP-X2510Z, CP-X3010Z, C2059FS, CP-X3011, CP-X3511> AC 100-120 V/3. 3 A, AC 220-240 V/1. 7 A <CP-X2011> AC 100-120 V/290 W, AC 220-240 V/270 W <CP-X2510Z, CP-X3010Z, C2059FS, CP-X3011, CP-X3511> AC 100-120 V/320 W, AC 220-240 V/300 W 5 ~ 35 °C (Operating) 317 (W) x 98 (H) x 288 (D) mm * Not including protruding parts. 3. 5 kg <CP-X2510Z, CP-X3010Z, C2059FS, CP-X3011, CP-X3511> approx. [. . . ]