User manual HITACHI C2864TN

[. . . ] Should you encounter any difficulty in the set-up or operation of your television, firstly refer to the Trouble Shooting Guide at the rear of this manual. In the unlikely event of a problem occurring with your TV, switch off at the mains socket, pull out the plug, and contact your dealer immediately. Under no circumstances remove the rear cover of your TV. Never guess or take any chances with electrical equipment of any kind - it is better to be safe than sorry! Software Notice It is prohibited for the end user of this product to copy, reverse engineer or reverse compile the software included therein, save to the extent permitted by law. Dolby Digital Manufactured under license from Dolby Laboratories. [. . . ] menu, press the cursor down button to select CHANGE PASSWORD. Once highlighted, accept selection. 2 3 `ENTER PASSWORD' will be highlighted. Press O. K. to accept selection. 4 Enter your chosen 4 digit password using the LEFT/RIGHT cursor keys to select each character and UP/DOWN cursor keys, or 0-9 number keys * to change each character. *The number buttons on your handset can also be used to enter letters. To enter letters: Press the number key twice for the first corresponding letter (written above the key), three times for the second etc. e. g. : Press number key 2, twice for `A', three times for `B' and four times for `C'. 5 6 Press O. K. to complete. To return to normal TV operation, press the TV button on your handset. PASSWORD IMPORTANT!For future reference, write your password in the box provided and keep in a safe place! password change tuning in 21 10 programme, sound and vision adjustment For picture and sound values, moving the cursor left will decrease values, whilst moving the cursor right will increase values. 1 2 3 4 5 6 7 8 Noise Reduction Press the MENU button to obtain MAIN MENU. The MAIN MENU highlights the PICTURE option automatically press OK to select. Select the picture control to be adjusted by using the UP / DOWN cursor buttons. Once highlighted, adjust the chosen controls by pressing the LEFT/RIGHT cursor buttons. To select MORE options, use the UP/DOWN buttons to highlight selection and then press OK to confirm. Select the picture control to be adjusted by using the UP/DOWN cursor buttons. Once highlighted, adjust the chosen controls by pressing the LEFT/RIGHT cursor buttons (for explanation see below). The values changed will remain until they are next altered. Press the TV button on your handset to return to normal TV operation. picture controls Helps reduce the noise interference visible on your television, especially in weaker signal reception areas. Sockets have been provided to enable you to do so if you wish. You can, however, enjoy a surround sound experience, without the need to add external equipment, from your televisions Digital 3DS surround sound system developed by Hitachi. Digital 3DS uses the surround channel information which has been separated from the original sound track by the integral Digital decoder, and processes it, before feeding it back to the internal TV speakers. stereo When stereo mode is selected, your TV produces high quality stereo sound. Select this mode when viewing general TV and music programmes. when using headphones When the headphones are in use the only sound mode available will be the STEREO option. 26 digital options in sound mode When your television is switched to an AV scart input whose decode mode is set to AUTO/DIGITAL and a digital signal source is connected and playing on the coaxial or optical connectors, the options found in the SOUND MODE menu become dependent on the type of digital signal being received. Please note: to enjoy the sound benefits of Dolby Digital etc. you will require software (eg. DVD disc, in which Dolby-D, signals are recorded. ) and suitable hardware (some form of disc player, which can output a digital signal). Dolby Digital signal options Dolby Digital Dolby ProLogic Stereo In this mode surround sound can be created, with the digital audio capabilities increasing the precise localisation of sounds, improving the ambience experienced. In this mode surround sound can be created. Stereo downmix** mode which inputs the Dolby Digital x/y. z information through your televisions internal left and right speakers. 44. 1/48kHz PCM signal options Dolby Pro Logic Stereo In this mode surround sound can be created. Stereo mode which provides signals for your televisions internal left and right speakers. **Downmix - this is when all the five multi-channels (left, right, surround left, surround right, centre) are outputted through the televisions left and right speakers 6 To return to normal TV operation press the television button on your handset. sound mode Please note: When the television is set to digital mode and no external equipment is connected, your television will assume PCM mode and will offer the options listed above in the PCM signal options. It must also be noted that the type of audio signal which will be outputted can usually be found on your external equipment. programme, sound and vision adjustment 27 programme, sound and vision adjustment . . . notes on digital audio setup The Digital Audio Setup menu allows you to control the sound output of any external equipment you have connected through the Audio Visual sockets. For example, if the connection from your external equipment to the television is via AV4, the Digital Audio source should be set as AV4. 1 2 3 4 5 6 7 digital input source Press the MENU button to obtain the MAIN MENU. Press the cursor DOWN button to select AUDIO. [. . . ] Transmitter problems. Re-align aerial. Check what external equipment is connected and check its scart AV status. multiple images - sound O. K AV Input not set correctly. Interference from electrical or mechanical motors, fluorescent lights, portable radios etc. Check devices for shielding and renew if necessary or move further from TV. intermittent interference Press the AV button or to buttons on your handset to return to normal TV mode. Check picture/sound controls (go to MAIN MENU). Press one of the buttons to . TV may be in AV mode. Picture/sound controls set to minimum. no picture or sound TV in standby mode. If a problem still continues after referring to this guide contact your dealer immediately. Under NO circumstances remove the rear cover of your TV. 48 Thank You for purchasing this Hitachi Television. [. . . ]