User manual HITACHI C32W35TN

[. . . ] Users Guide C28W35TN C32W35TN SCREEN introduction Dear HITACHI customer Congratulations on your purchase of the very latest state of the art technology. At Hitachi we pride ourselves on producing high quality televisions with outstanding picture and audio capabilities, coupled with Hitachi's reputation for superior reliability. You should enjoy many years of trouble free operation from your TV. Take some time to read this Users Guide thoroughly, and if you encounter any difficulty, firstly refer to the Trouble Shooting Guide at the rear of this manual. [. . . ] Therefore the picture format will revert to the setting specified in the DEFAULT ZOOM option if there is no WSS signal. 20 . . . notes on wide screen features Various broadcast stations now transmit movies and programs in true wide screen format. Built into your TV is software that detects these signals and automatically switches your TV to the correct format. However, some broadcasters do not transmit this automatic sensing signal, and so your TV will not recognise which format is being transmitted. This situation can be overcome by simply pressing the key on your handset. auto format Auto mode automatically detects various screen formats that are transmitted in either conventional (4:3) or wide screen (16:9 or 14:9) format. After detecting which signal is being transmitted the TV will automatically switch to the correct screen ratio. In example 1 (right) a 4:3 conventional picture format is shown - note the black bars to the sides of the screen - this is consistent with screen compression. Note: Hitachi recommend AUTO is selected for the majority of TV viewing. 16:9 format The picture (right) illustrates a true 16:9 wide screen picture format. This type of picture fills the entire TV screen. The 16:9 mode can also be manually selected if desired by pressing the button on your handset. 14:9 format The 14:9 format (right) is the medium between the 4:3 and 16:9 ratio signals. When this mode is selected thin black bars appear to the sides of the screen. features - wide screen 21 features - wide screen panoramic format The panoramic mode emulates that of a wide screen broadcast for 4:3 transmissions. This is achieved by maintaining the proportions of the centre of the screen while shrinking the images on the top and bottom of the screen. Note: This mode is generally recommended if AUTO is not selected C16:9L format The 16:9 ratio is the format that is usually transmitted by the broadcasting stations. The C16:9L format is used to expand a 16:9 `letter box' broadcast so that it uses the full screen to display the picture so that the image does not appear `crushed'. before after C14:9L format The 14:9 ratio is the format that is sometimes transmitted by the broadcasting stations. The C14:9L format is used to expand a 14:9 broadcast so that it produces an image of true proportions, but because of the original ratio the screen will have thin black bars to the right and to the left of the picture. before after C14:9LS format Some broadcasters transmit in a 14:9 format, which appears with black bands down each side of your picture. C14:9LS enlarges the picture (which can cut off the top) so these black bars are no longer visible. before after 4:3 format The conventional picture format for most broadcasts is the 4:3 ratio signal which gives black bars to the sides of the screen and this is consistent with screen compression (see right). 22 1 2 3 Press and hold the MENU button for 5 seconds. The INSTALL option in the MAIN MENU appears. Press the cursor down button to select INSTALL. Once highlighted, accept selection. 4 5 Press the cursor down button to select MANUAL SETUP. Once highlighted, accept selection. 6 Use the cursor keys to move the selection bar over the NAME required to be adjusted. 7 Once highlighted, accept the selection to change the name and you will see the selection bar turn red and the chosen character will flash on and off - it is ready to be changed. Note: Pressing the `0' button will clear all the characters of the chosen name. 8 9 10 You can input up to 5 characters - to change each character use the up/down cursor buttons. To move from character to character use the right/left cursor buttons. Once the new NAME has been chosen and entered, confirm your entry to be stored and repeat if necessary. 11 To return to normal TV operation press the television button on your handset. 23 program name change program swap It is advisable to organise your viewing channels at this point - the next section (signal source entry) allows you to give individual channels their own signal source for external equipment connection such as camcorders, games machines etc. 1 2 3 4 5 Press and hold the MENU button for 5 seconds. The INSTALL option in the MAIN MENU appears. Press the cursor down button to select INSTALL. Once highlighted, accept selection. Press the cursor down button to select MANUAL SETUP. Once highlighted, accept selection. 6 Select your first program to swap by moving the selection bar using the up/down cursor buttons over a channels PR number. 7 Once highlighted, accept the selection and you will see the selection bar turn red - it is ready to be swapped. 8 Select your second program to swap by moving the selection bar using the up/down cursor buttons. 9 10 24 Once this has been done, accept selection and the two chosen programs will swap position - repeat if necessary. To return to normal TV operation press the television button on your handset. . . . notes on signal source entry Each piece of external equipment connected to your TV must have its own input socket. It would also be easier, and more organised, if the external equipment connected also had its own channel number. Signal Source entry allows us to tell the allocated channel what equipment is connected to which socket. This would make the switching between normal operation and the connected equipment much smoother. For example, if you want to connect a games machine to your TV 1. [. . . ] Check with local Operator. snowy picture - poor sound Transmitter problems. Aerial has moved position. Transmitter problems. Re-align aerial. Check what external equipment is connected and check its scart AV status (see page 31). multiple images - sound O. K AV Input not set correctly. Magnetic interference from electrical or mechanical motors, fluorescent lights, portable radios etc. Check devices for shielding and renew if necessary or move further from TV. intermittent interference Press television button or to buttons on your handset to return to normal TV mode. Check picture/sound controls (go to MAIN MENU). [. . . ]