User manual HITACHI CDR-8330

[. . . ] Drive Performance 3. 1 Interface 3. 2 Read Mode 3. 3 Rotational Speed 3. 4 Data Transfer Rate 3. 5 Access Time 3. 6 Data Error Rate 3. 7 Spin up Time 3. 8 Buffer Memory Size 4. Environmental Conditions 4. 1 Ambient Temperature 4. 2 Approval Temperature Rise 4. 3 Temperature Gradient 4. 4 Relative Humidity 4. 5 Dew Point Temperature Restrictions 4. 6 Vibration 4. 7 Shock 4. 8 Drop Impact 5. Reliability 5. 1 MTBF 5. 2 MTTR 5. 3 Loading Operation Life 6. [. . . ] 2) Average of 100 access operations, from 00-min 02-s 00-blk to 59-min 59-s 74blk, with latency. 3. 6 Data Error Rate Less than 10-12 (Mode-1) Less than 10-9 (Mode-2) Condition: It is assumed that raw error rate of the disc is 10-3 in the worst case. Note: Excluding " retries " 3. 7 Spin Up Time Spin up from standby mode Typical 6 s to drive ready mode Spin up with tray loading Typical 10 s to drive ready mode Note: Photo-CD (Multisession) is not applicable. 3. 8 Buffer Memory Size 128 kbytes Drive performance is guranteed on the Hitachi standard test conditions. That includes PCs, test discs, check programs, and others with normal environmental conditions. Environmental Conditions 4. 1 Ambient Temperature Operating Storage / Transportation 4. 2 Approval Temperature rise 5 oC to 45 oC -30 oC to 60 oC 45 oC Max. at the center of Top Cover Page4 HITACHI CD-ROM DRIVE CDR-8330 SPECIFICATIONS 4. 3 Temperature Gradient 4. 4 Relative Humidity Operating Storage/Transportation 4. 5 Dew Point Temperature Restrictions 4. 6 Vibration Operation 10 oC/h 15% to 85% (Non-Condensing) 10% to 90% (Non-Condensing) Less than 29 oC Less than 1. 96 m/s2 (0. 2G) (CD-ROM data read) 5 to 300 Hz Sine Wave, swept at a rate of 3 oct. /min. Less than 9. 8 m/s2 (1. 0G) 5 to 300 Hz swept at a rate of 1 oct. /min. Note: Each of 3 direction, Power OFF and no disc loaded Packed unit to be applied random vibration for 20 min at 5 to 50 Hz and 0. 82G amplitude. Check unit for satisfactory electrical operation and no physical damage. Note: Z-axis directions, Power OFF and no disc loaded Check unit for satisfactory electrical operation and no physical damage. Less than 9. 8 m/s2 (1. 0 G), 11ms Half sine wave Shock Less than 490 m/s2 (50 G), 10ms Square Wave Shock Note: Each 3 directions, Power OFF and no disc loaded Less than 60 cm Note: Bulk package, 1 Corner, 3 Edges, 6 Faces. Storage Transportation 4. 7 Shock Operation Storage 4. 8 Drop Impact 5. Reliability 5. 1 MTBF Assumption: -POH per year -ON/OFF cycles per year -Operating duty cycle 5. 2 MTTR 5. 3 Loading Operation Life 6. Electro Static Discharge Susceptibility Up to 5 kV From 5 kV to 20 kV Test Conditions : 100, 000 Power On hours (POH) Used in a normal office environment 3, 000 480 20% of Power on time (Seek: 5% of operating time) 0. 5 h 10, 000 times (1 time :loading and unloading) No read error No damage (Read errors are allowed) C = 150pF, R = 330 ohms, 50 times discharge Note:Excluding Terminal Page5 HITACHI CD-ROM DRIVE CDR-8330 SPECIFICATIONS 7. Power Requirements 7. 1 DC Voltage and current +5V+5% Rating 0. 8 A Ripple<150 mVp-p +12V+10% Rating 0. 5A Ripple<300 mVp-p Power Consumption at stand-by (sleep) 8. Audio Performance 8. 1 Number of Channels 8. 2 Frequency Response 8. 3 Distortion 8. 4 Output Levels Headphones Line Out 8. 5 Output terminals Headphones Line Out 9. [. . . ] ( total 20 drives ) Carton Size (W x H x D) : 523 x 236 x 696 mm Mass : 21. 5. 1 2 3 4 Parts Name Packing Cushion Polyethylene Bag Master Carton Tape Specification Foamed Polystyrene Polyethylene Sheet Corrugated Fibreboard Cler Polypropylene Page9 HITACHI CD-ROM DRIVE CDR-8330 SPECIFICATIONS 16. Enhanced-IDE Interface Command List 16. 1 ATA < Command > ATAPI Soft Reset Check Power Mode Execute Drive Diagnostics Idle Idle Immediate NOP ATAPI Packet Command ATAPI Identify Device Set Features Sleep Standby Standby Immediate 16. 2 ATAPI < Command > SCAN INQUIRY MODE SELECT (10) MODE SENSE (10) PAUSE/ RESUME PLAY AUDIO (10) PLAY AUDIO (12) PLAY AUDIO MSF PLAY TRACK RELATIVE (10) PLAY TRACK RELATIVE (12) PREVENT/ ALLOW MEDIUM REMOVAL READ (10) READ (12) READ CD-ROM CAPACITY READ CD READ CD MSF READ HEADER READ SUB-CHANNEL READ TOC REQUEST SENSE REZERO UNIT SEEK SET CD SPEED STOP PLAY/ SCAN START STOP UNIT TEST UNIT READY MECHANISM STATUS < Code > 08h E5h 90h E3h E1h 00h A0h A1h EFh E6h E2h E0h < Code > BAh 12h 55h 5Ah 4Bh 45h A5h 47h 49h A9h 1Eh 28h A8h 25h BEh B9h 44h 42h 43h 03h 01h 2Bh BBh 4Eh 1Bh 00h BDh 17. [. . . ]