User manual HITACHI CL2125T

[. . . ] USERS GUIDE C2125T/S CL2125T/S CP2125T/S Contents Remote Control Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Control Panel Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Connect Peripheral Equipment . . . . . . . . . . . . . . . . . . . . . . 4 Via the SCART connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] In the rank list you will see the programme numbers and names assigned to the programmes. At the first programme with programme number 1 will be displayed and the programme number 1 will be selected. Using or or or key you can move the flashing number and then display the NOTE: Remove batteries from remote control handset when it is not to be used for a long period. Otherwise it can be damaged due to any leakage of batteries. GB - 9 - programme corresponding to the flashing number pressing RED button. If you do not accept the correspondence between programme numbers and names and want to change them, press MENU button and then BLUE button, so that you enter the Installation menu. In the Installation menu select TUNING menu and enter it. To use tuning menu, refer to the Tuning submenu in the Installation Menu section of this manual. Programme Selecting Press Programme Up button to select next programme or Programme Down button to select the previous programme. Operating with Remote Control The remote control handset of your TV is designed to control all the functions of the model you selected. The functions will be described in accordance with the menu system of your TV. Functions which you can use out of menu system are described below. Volume Setting Press Press button to increase volume. button to decrease volume. Programme Selecting (Previous or next programme) Press Press button to select the next programme. button to select the previous programme. Programme Selecting (direct access): Operating with the onset buttons Volume setting and programme selection can be made using the buttons on the front panel. Volume Setting Press -Volume button to decrease volume or Volume+ button to increase volume, so a volume level scale will be displayed on the screen. Press digit buttons on the remote control handset to select programmes between 0 and 9. Press - - button to select programmes between 10 and 99. for programme 27, press 2 and 7) Press directly the programme number to reselect single digit programmes. GB - 10 - Menu System Your TV has been designed with a menu system, to provide an easy manipulation of a multifunction system. The TV is controlled by choosing the commands displayed on the screen. Below is described the use of the menu system. Main menu will be displayed on the screen. On the remote control each option is identified with a different colour. To select an option, press the button with the corresponding colour, on the remote control handset. For example for sound settings, press RED button, for picture settings, press GREEN button etc. Sound Menu To change sound settings Enter the Sound Menu directly, pressing the Red button or, Press MENU button, now you are in main menu. In the main menu, select SOUND using or button, then enter the sound menu pressing or button. Setting Volume: As you enter the sound menu, Volume will be the first selected option. [. . . ] When time information is displayed on screen, entering another menu will remove it, but after leaving that menu time information will appear again. Remote Control: Your TV no longer responds to the remote control. Press the TV button on the remote control once more. If so you can still use the local keys at the front of your TV. Press TV key to return to TV mode or press MENU to return to the previous menu. No solution: Switch your TV set off and on. [. . . ]