User manual HITACHI CP-D10

[. . . ] Projector CP-D10 User's Manual (detailed) Operating Guide Thank you for purchasing this projector. WARNING Before using this product, please read all manuals for this product. Be sure to read "Safety Guide" first. After reading them, store them in a safe place for future reference. About this manual Various symbols are used in this manual. [. . . ] In this case, please turn off the Closed Caption. DISPLAY Select the Closed Caption DISPLAY setting from following options using the / cursor buttons. AUTO ON OFF AUTO : Closed Caption automatically displays when the volume is muted. · The caption is not displayed when the OSD menu is active. · The Closed Caption is the function to display the dialogue, narration, and / or sound effects of a television program or other video sources. The Closed Caption availability is depending upon broadcaster and/or content. MODE Select the Closed Caption MODE setting from following options using the / cursor buttons. CAPTIONS TEXT CAPTIONS : Display Closed Caption. TEXT : Display Text data, which is for additional information such as news reports or a TV program guide. The information covers the entire screen. CHANNEL Select the Closed Caption CHANNEL from following options using the / cursor buttons. 1 2 3 4 1: Channel 1, primary channel / language 2: Channel 2 3: Channel 3 4: Channel 4 The channel data may vary, depending on the content. Some channel might be used for secondary language or empty. C. C. (Closed Caption) 41 OPTION menu OPTION menu From the OPTION menu, items shown in the table below can be performed. Select an item using the / cursor buttons, and press the cursor (or the ENTER) button to execute the item, except for the items LAMP TIME and FILTER TIME. Then perform it according to the following table. Item Description Using the / cursor buttons turns on/off the automatic signal search function. ON OFF When the ON is selected, detecting no signal automatically cycles through input ports in the following order. The search is started from the current port. Then when an input is found, the projector will stop searching and display the image. COMPUTER IN1 COMPUTER IN2 VIDEO S-VIDEO Using the / cursor buttons turns on/off the DIRECT POWER ON function. ON OFF When set to the ON, the lamp in projector will be automatically turned on without the usual procedure ( 14), only when the projector is supplied with the power after the power was cut while the lamp was on. · This function does not work as long as the power has been supplied to the projector while the lamp is off. [. . . ] <INCREMENT> Increment setup value [(bL)(bH)] by 1. <DECREMENT> Decrement setup value [(bL)(bH)] by 1. <EXECUTE> Run a command [(bL)(bH)]. (aL) (aH) 01h 00h (bL) (bH) (cL) (cH) (aL) (aH) 02h 00h (bL) (bH) 00h BEh EFh 03h 06h 00h 00h (aL) (aH) 04h 00h (bL) (bH) 00h 00h (aL) (aH) 05h 00h (bL) (bH) 00h (aL) (aH) 06h 00h (bL) (bH) 00h 00h 00h [Header code] [Packet] [Data size] Set [BEh, EFh, 03h, 06h, 00h] to byte number 0 ~ 4. [CRC flag] For byte number 5, 6, refer to RS-232C Communication command table ( 11). [. . . ]