User manual HITACHI CP-RX80

[. . . ] Projector CP-RX80 User's Manual (detailed) Operating Guide Thank you for purchasing this projector. WARNING Before using this product, please read all manuals for this product. Be sure to read "Safety Guide" first. After reading them, store them in a safe place for future reference. About this manual Various symbols are used in this manual. [. . . ] MyScreen ORIGINAL OFF MyScreen : Screen can be registered by the MyScreen item ( 38). ORIGINAL : Screen preset as the standard screen. · To avoid remaining as an afterimage, the MyScreen or ORIGINAL screen will change to the BLANK screen ( 21) after several minutes. If also the BLANK screen is the MyScreen or ORIGINAL, the plain black screen is instead used. · When the ON is selected to the MyScreen PASSWORD item in the SECURITY menu ( 48), the START UP is fixed to MyScreen. START UP (continued on next page) 37 SCREEN menu Item Description This item allows you to capture an image for use as a MyScreen image which can be used as the BLANK screen and START UP screen. Display the image you want to capture before executing the following procedure. Selecting this item displays a dialog titled "MyScreen". It will ask you if you start capturing an image from the current screen. Please wait for the target image to be displayed, and press the ENTER or INPUT button when the image is displayed. The image will freeze and the frame for capturing will appear. To stop performing, press the RESET button on the remote control. Using the / / / buttons adjusts the frame position. Please move the frame to the position of the image which you want to use. The frame may not be able to be moved for some input signals. To start registration, press the ENTER or INPUT button on the remote control. To restore the screen and return to the previous dialog, press the RESET button on the remote control. When the registration is completed, the registered screen and the following message is displayed for several seconds: "MyScreen registration is finished. " If the registration failed, the following message is displayed: "A capturing error has occurred. Please try again. " · This function cannot be selected when the ON is selected to the MyScreen Lock item ( 39). · This function cannot be selected when the ON is selected to the MyScreen PASSWORD item in SECURITY menu ( 48). MyScreen (continued on next page) 38 SCREEN menu Item Description Using the / buttons turns on/off the MyScreen lock function. ON OFF When the ON is selected, the item MyScreen is locked. Use this function for protecting the current MyScreen. · This function cannot be selected when the ON is selected to the MyScreen PASSWORD item in SECURITY menu ( 48). [. . . ] They will tell you what warranty condition is applied. Please check the following web address where you may find the latest information for this projector. http://www. hitachi. us/digitalmedia or http://www. hitachidigitalmedia. com NOTE · The information in this manual is subject to change without notice. · The manufacturer assumes no responsibility for any errors that may appear in this manual. · The reproduction, transfer or copy of all or any part of this document is not permitted without express written consent. [. . . ]