User manual HITACHI CP-SX12000

[. . . ] Projector CP-X10000/CP-WX11000/CP-SX12000 User's Manual (detailed) ­ Operating Guide Thank you for purchasing this projector. WARNING Before using this product, please read the "User's Manual Safety Guide" and related manuals to ensure the proper use of this product. After reading them, store them in a safe place for future reference. About this manual Various symbols are used in this manual. The meanings of these symbols are described below. [. . . ] · When the horizontal lens shift is not set to the center, this function may not work well. · This function will be unavailable when the Transition Detector is on (64). AUTO KEYSTONE KEYSTONE (continued on next page) 40 SETUP menu Item Description Using the / buttons corrects the horizontal keystone distortion. Shrink the left of the image ó Shrink the right of the image · The adjustable range of this function will vary among inputs. For some input, this function may not work well. · When the zoom adjustment is set to the TELE (telephoto focus), this function may be excessive. This function should be used when the zoom adjustment is set to the full WIDE (wide-angle focus) whenever possible. · When the vertical lens shift is not set fully upward (not set fully downward for the optional lens typeUSL-801 only (51), this function may not work well. · This function will be unavailable when the Transition Detector is on (64). Using the / buttons turns off/on the eco mode. NORMAL ó ECO · When the ECO is selected, acoustic noise and screen brightness are reduced. Using the / buttons switches the mode for mirror status. KEYSTONE ECO MODE NORMAL ó H:INVERT ó V:INVERT ó H&V:INVERT MIRROR If the Transition Detector is on and MIRROR status is changed, Transition Detector alarm (64) will be displayed when projector is restarted after the power switch is turned off. When V:INVERT or H&V:INVERT is selected, functions of / cursor buttons on the projector are reversed after the dialog menu disappears. The combination of a picture shown on screen and output from the MONITOR OUT port can be arranged in the menu. The picture coming into the port selected in the (2) is output to the MONITOR OUT port while an image from the port chosen in the (1) is on screen. (1) Choose a picture input port using / buttons. · Choose STANDBY, to select the output signal from the MONITOR OUT port in the standby mode. (2) Select one of the COPUTER IN or BNC ports using / buttons. COMPUTER IN1 ó COMPUTER IN2 OFF ó BNC · OFF disables the MONITOR OUT port. MONITOR OUT 41 SCREEN menu SCREEN menu From the SCREEN menu, items shown in the table below can be performed. Select an item using the / cursor buttons on the projector or remote control, and press the cursor button on the projector or remote control, or ENTER button on the remote control to execute the item. Then perform it according to the following table. Item Description Using the /// buttons switches the OSD (On Screen Display) language. LANGUAGE MENU POSITION Using the /// buttons adjusts the menu position. To quit the operation, press the MENU button on the remote control or keep no operation for about 10 seconds. [. . . ] Turn off the both equipment, and turn on them again Check the video setting on your HDMI equipment. 14 Your HDMI equipment and the projector are not harmonized. The signal format on the HDMI is not supported. ­ 14 (Continued on next page) 75 Troubleshooting Phenomenon Video screen display freezes. Colors have a faded- out appearance, or Color tone is poor. Cases not involving a machine defect The FREEZE function is working. [. . . ]