User manual HITACHI CP-WUX645N

[. . . ] Projector CP-WUX645N User's Manual (detailed) ­ Operating Guide Thank you for purchasing this projector. WARNING Before using this product, please read the "User's Manual Safety Guide" and related manuals to ensure the proper use of this product. After reading them, store them in a safe place for future reference. About this manual Various symbols are used in this manual. The meanings of these symbols are described below. [. . . ] (1) Choose a picture input port using / buttons. QUIT ó RGB1 ó RGB2 ó HDMI STANDBY ó VIDEO ó S-VIDEO ó COMPONENT(Y, CB/PB, CR/PR) · Choose STANDBY, to select the output signal from the RGB OUT port in the standby mode. · While QUIT is selected, pressing the button returns to the previous menu. (2) Select one of the RGB ports using / buttons. RGB1 ó RGB2 ó OFF · OFF disables the RGB OUT port. MONITOR OUT 40 AUDIO Menu AUDIO Menu From the AUDIO Menu, items shown in the table below can be performed. Select an item using the / cursor buttons on the projector or remote control, and press the cursor button on the projector or remote control, or ENTER button on the remote control to execute the item. Then perform it according to the following table. NOTE · If the volume is too loud or the treble or bass are overly emphasized, the case may vibrate or the sound may become distorted. Reduce the volume, treble or bass to eliminate the distortion. Item VOLUME TREBLE BASS SPEAKER Description Using the / buttons adjusts the volume. High ó Low Using the / buttons adjusts the treble level. High ó Low Using the / buttons adjusts the bass level. High ó Low Using the / buttons turns the speaker function on/off. TURN ON ó TURN OFF · When the TURN ON is selected the built-in speaker works. (1) Choose a picture input port using the / buttons. QUIT ó RGB1 ó RGB2 ó HDMI ó COMPONENT AUDIO OUT STANDBY ó VIDEO ó S-VIDEO (2) Select the audio port to be interlocked with the input port using the / buttons. 1ó2ó3ó4ó óH · H is abbreviation of HDMI. · H can be selected for HDMI port only. When H is selected, the audio signal to HDMI port will be output if HDMI is chosen as a display source. · When is selected to VIDEO, S-VIDEO or COMPONENT port, the C. C. (Closed Caption) is automatically activated, if the C. C. is set to AUTO in the DISPLAY Menu of the C. C. Menu and the signal from the input port supports the C. C. [. . . ] Change the setting of VIDEO NR in the INPUT menu. The FRAME LOCK function cannot work on the current input signal. Set FRAME LOCK in the INPUT menu to OFF. The exhaust ventilation holes at front is blocked by some objects. [. . . ]