User manual HITACHI CP-WX410

[. . . ] Projector CP-WX410 User's Manual (detailed) Operating Guide Thank you for purchasing this projector. WARNING Before using this product, please read all manuals for this product. Be sure to read "Safety Guide" first. After reading them, store them in a safe place for future reference. About this manual Various symbols are used in this manual. [. . . ] In such a case, it might be good to select a suitable mode except AUTO. Using the / buttons switches the function of the COMPONENT (Y, Cb/Pb, Cr/Pr) port. COMPONENT ó SCART RGB When the SCART RGB is selected, COMPONENT (Y, Cb/Pb, Cr/ Pr) and VIDEO ports will function as a SCART RGB port. A SCART cable is required for a SCART RGB input to the projector. For your reference, see the TECHNICAL part. PROGRESSIVE COMPONENT (continued on next page) 31 INPUT menu INPUT menu (continued) Item Description The video format for S-VIDEO port and VIDEO port can be set. (1) Use the / buttons to select the input port. (2) Using the / buttons switches the mode for video format. AUTO ó NTSC ó PAL ó SECAM N-PAL ó M-PAL ó NTSC4. 43 · This item is performed only for a video signal from VIDEO port or S-VIDEO port. · The AUTO mode automatically selects the optimum mode. · The AUTO operation may not work well for some signals. an irregular picture, lack of color), please select the mode according to the input signal. Using the / cursor buttons changes the HDMI signal mode. AUTO ó NOMAL ó ENHANCED HDMI Feature Selecting the optimum mode automatically Suitable for DVD singals(16-235) Suitable for VGA signals(0-255) VIDEO FORMAT AUTO NORMAL ENHANCED ·If the contrast of the screen image is too strong or too weak, try finding a more suitable mode Set the frame lock function on/off for each port. (1) Using the / buttons to select one of following ports. QUIT ó COMPUTER(IN)1 ó COMPUTER(IN)2 ó HDMI (2) Using the / buttons to turns the frame lock function on/off. TURN ON ó TURN OFF · This item can be performed only on a signal with a vertical frequency of 50 to 60 Hz. · When the TURN ON is selected, the moving pictures are displayed more smoothly. · This function may cause a certain degradation of the picture. The computer input signal type for COMPUTER IN1 and IN2 ports can be set. (1) Use the / buttons to select the input port to be set. COMPUTER (IN)1 ó COMPUTER (IN)2 (2) Use the / buttons to select the computer input signal type. AUTO ó SYNC ON G OFF (continued on next page) FRAME LOCK COMPUTER IN (continued on next page) 32 INPUT menu INPUT menu (continued) Item Description Selecting the AUTO mode allows you to input a sync on G signal or component signal from the port. [. . . ] Decreasing the projector setting value (Decrement command) (1) The PC sends the following decrement code to the projector. Header + Command data (`05H' + `00H' + type (2 bytes) + `00H' + `00H') (2) The projector decreases the setting value on the above setting code. (3) The projector returns the response code `06H' to the PC. When the projector cannot understand the received command When the projector cannot understand the received command, the error code `15H' is sent back to the PC. [. . . ]