User manual HITACHI CP-X265WF

[. . . ] Projector CP-X265 User's Manual ­ Operating Guide Thank you for purchasing this projector. WARNING Before using this product, please read the "User's Manual Safety Guide" and related manuals to ensure the proper use of this product. After reading them, store them in a safe place for future reference. About this manual Various symbols are used in this manual. The meanings of these symbols are described below. [. . . ] 0 Use the /// buttons to enter the DEFAULT DEFAULT GATEWAY GATEWAY (a node on a computer network that serves as an access point to another network) address. This function is available as long as DHCP is set to "TURN OFF". Input the TIME DIFFERENCE : Use the / buttons to enter the TIME DIFFERENCE. Set the same TIME DIFFERENCE as that on your PC. If unsure, ask your network administrator. Use the button to return to the menu after setting the TIME DIFFERENCE. Input DATE AND TIME : Use the /// buttons to enter the Year (last two digits), Month, Date, Hour and Minute. ~Note~ The projector will override this setting and retrieve DATE AND TIME information from the Timeserver when SNTP is enabled. See [Date/ Time Settings] in [User's Manual - Network Functions: Configuring and Controlling the Projector via a Web Browser] for SNTP settings. e-SHOT display : Use the / buttons to select an item and the or ENTER buttons to display the image. Image Image Image3 Image4 File names of registered images are displayed by 6 characters or less. Example: DEMONSTRATION-0 "NEW" stamp is added to the head of line when the image is registered newly. After the image IMAGE1 is displayed, "NEW" stamp will be erased. eSHOT Once an image is displayed, you can use the / buttons to page through the images. Use RESET : IMAGE1 :NO ENTER , :YES ESC , + the or ESC buttons to return to the menu. Pressing the RESET button on the remote control while an image is being displayed will display the RESET menu. The displayed image can be deleted from the RESET menu using the ENTER button on the remote control or the INPUT button on the projector. If you do not wish to delete the image use the ESC button on the remote control or push the and INPUT buttons on the projector at the same time. ~Note~ · Items with no image stored cannot be selected. · Images can be changed using the / buttons while the image data downloads. 5 TIME DIFFERENCE DATE AND TIME e-SHOT NETWORK Menu NETWORK Menu (continued) Item Operation INFORMATION display : Use the or ENTER buttons to view network information and confirm settings. INFORMATION ~Note~ · Only the first 16 characters of the projector name are displayed. · When the voltage level of battery for built in clock decreases, set time may become incorrect even though accurate date and time are input. [. . . ] (2) The projector in creases the setting value on the above setting code. (3) The projector returns the response code `06H' to the computer. Decreasing the projector setting value (Decrement command) () The computer sends the decrement code Header + Command data (`05H'+ `00H'+ type (2 bytes) +`00H' + `00H') to the projector. (2) The projector decreases the setting value on the above setting code. [. . . ]