User manual HITACHI CP-X444W

[. . . ] Projector CP-X444/CP-X440 User's Manual ­ Operating Guide Thank you for purchasing this projector. WARNING Before using this product, please read the "User's Manual Safety Guide" and related manuals to ensure the proper use of this product. After reading them, store them in a safe place for future reference. About this manual Various symbols are used in this manual. The meanings of these symbols are described below. [. . . ] For a component video signal The aspect ratio will be automatically selected. The clock phase will be automatically adjusted. · The automatic adjustment operation requires approximately 10 seconds. Also please note that it may not function correctly with some input. H SIZE AUTO ADJUST EXECUTE 29 Multifunctional settings INPUT Menu With the INPUT menu, the items shown in the table below can be performed. Select an item using the cursor buttons / on the projector or remote control, and press the cursor button on the projector or remote control, or the ENTER button on the remote control to execute the item. Then perform it referring to the following table. Item Description Using the buttons / switches the mode for color space. AUTO RGB SMPTE240 REC709 REC601 COLOR SPACE · This item can be selected only for an RGB signal or a component video signal (except signals of 525i(480i)/625i(576i) from the component video port). · The AUTO mode automatically selects the optimum mode. · The AUTO operation may not work well at some signals. In such a case, it might be good to select a suitable mode except AUTO. Using the buttons / switches the function of COMPONENT VIDEO port. COMPONENT SCART RGB When the SCART RGB is selected, the COMPONENT VIDEO port function as a port for a SCART RGB signal input. A SCART adapter and SCART cable realize a SCART RGB input to the projector. Using the buttons / switches the mode for video format. AUTO NTSC PAL SECAM N-PAL M-PAL NTSC4. 43 · This item is performed only for a video signal from the VIDEO port or the S-VIDEO port. For a component video signal, the signal type is identified automatically independently of this function. · The AUTO mode automatically selects the optimum mode. · The AUTO operation may not work well for some signals. an irregular picture, a color lack), please select the mode depending on the input signal. MENU[RGB] PICTURE IMAGE INPUT SETUP SCREEN OPTION EASYMENU :SELECT COLORSPACEAUTO COMPONENTCOMPONENT VIDEOFORMATAUTO INFORMATION COMPONENT VIDEO FORMAT 30 Multifunctional settings INPUT Menu (continued) Item Description Selecting this item displays a dialog titled "INPUT INFORMATION". It shows the information about the current input. INPUT-INFORMATION INPUT-INFORMATION -INFORMA RGB 1024x768 @60. 0 FRAME LOCK INPUT-INFORMATION INPUT-INFORMATION -INFORMA S-VIDEO SECAM AUTO INPUT-INFORMATION INPUT-INFORMATION -INFORMA COMPONENT 576i @50 SCART RGB INFORMATION · The "FRAME LOCK" message on the dialog means the frame lock function is working. This function automatically works when a RGB signal with vertical frequency of 50 to 60 Hz is input, and it displays a moving picture more smoothly. · The "SCART RGB" message means the COMPONENT VIDEO port is working as a SCART RGB input port. [. . . ] Increasing the projector setting value (Increment command) (1) The computer sends the increment code Header + Command data (`04H'+ `00H'+ type (2 bytes) +`00H'+`00H') to the projector. (2) The projector in creases the setting value on the above setting code. (3) The projector returns the response code `06H' to the computer. Decreasing the projector setting value (Decrement command) (1) The computer sends the decrement code Header + Command data (`05H'+ `00H'+ type (2 bytes) +`00H' + `00H') to the projector. [. . . ]