User manual HITACHI CP-X608W

[. . . ] Projector CP-X608 User's Manual ­ Operating Guide Thank you for purchasing this projector. WARNING Before using this product, please read the "User's Manual Safety Guide" and related manuals to ensure the proper use of this product. After reading them, store them in a safe place for future reference. About this manual Various symbols are used in this manual. The meanings of these symbols are described below. [. . . ] Plain screens in each color. · To avoid remaining as an afterimage, the MyScreen or ORIGINAL screen will change to the plain black screen after several minutes. (continued on next page) 39 SCREEN Menu SCREEN Menu (continued) Item Description The start-up screen is a screen displayed when no signal or an unsuitable signal is detected. MyScreen ORIGINAL TURN OFF Feature Screen can be registered by the MyScreen item MyScreen ( 41). START UP ORIGINAL TURN OFF Screen preset as the standard screen. Plain black screen. · To avoid remaining as an afterimage, the MyScreen or ORIGINAL screen will change to the BLANK screen ( 39) after several minutes. If also the BLANK screen is the MyScreen or ORIGINAL, the plain black screen is instead used. · When the TURN ON is selected to the MyScreen PASSWARD of SECURITY item in OPTION menu ( 49), the START UP is fixed to MyScreen. (continued on next page) 40 SCREEN Menu SCREEN Menu (continued) Item Description This item allows you to capture an image for use as a MyScreen image which can be used as the BLANK screen and START UP screen. Display the image you want to capture before executing the following procedure. Selecting this item displays a dialog titled "MyScreen". It will ask you if you start capturing an image from the current screen. Please wait for the target image to be displayed, and press the ENTER button on the remote control when the image is displayed. The image will freeze and the frame for capturing will appear. To stop performing, press the RESET or ESC button on the remote control. Please move the frame to the position of the image which you want to use. The frame may not be able to be moved for some input signals. To start registration, press the ENTER button on the remote control. To restore the screen and return to the previous dialog, press the RESET or ESC button on the remote control. When the registration is completed, the registered screen and the following message is displayed for several seconds: If the registration failed, the following message is displayed: · This item cannot be selected for an M1-D signal. · This function cannot be selected when the TURN ON is selected to the MyScreen Lock item ( below). · This function cannot be selected when the TURN ON is selected to the MyScreen PASSWARD of SECURITY item in OPTION menu ( 49). TURN ON TURN OFF When the TURN ON is selected, the item MyScreen is locked. Use this function for protecting the current MyScreen. · This function cannot be selected when the TURN ON is selected to the MyScreen PASSWARD of SECURITY item in OPTION menu ( 49). MyScreen MyScreen Lock (continued on next page) 41 SCREEN Menu SCREEN Menu (continued) Item Description TURN ON TURN OFF When the TURN ON is selected, the following message function works. "AUTO IN PROGRESS" while automatically adjusting "NO INPUT IS DETECTED" "SYNC IS OUT OF RANGE" "Searching. . . . " while searching for the input "Detecting. . . . " while an input signal is detected The indication of the input signal displayed by changing The indication of the aspect ratio displayed by changing The indication of the PICTURE MODE displayed by changing The indication of the ACTIVE IRIS displayed by changing The indication of the MY MEMORY displayed by changing The indication of "FREEZE" and "II" while freezing the screen by pressing the FREEZE button. [. . . ] Decreasing the projector setting value (Decrement command) (1) The computer sends the decrement code Header + Command data (`05H'+ `00H'+ type (2 bytes) +`00H' + `00H') to the projector. (2) The projector decreases the setting value on the above setting code. (3) The projector returns the response code `06H' to the computer. When the projector cannot understand the received command When the projector cannot understand the received command, the error code `15H' is sent back to the computer. [. . . ]