User manual HITACHI CP-DW10N

[. . . ] Projector CP-DW10N User's Manual (detailed) Operating Guide Thank you for purchasing this projector. WARNINGBefore using this product, please read all manuals for this product. Be sure to read "Safety Guide" first. After reading them, store them in a safe place for future reference. About this manual Various symbols are used in this manual. [. . . ] To restore the screen and return to the previous dialog, press the RESET (or press the cursor and the INPUT buttons at the same time) button. When the registration is completed, the registered screen and the following message is displayed for several seconds: "MyScreen registration is finished. " If the registration failed, the following message is displayed: "A capturing error has occurred. Please try again. " · This function cannot be selected when the ON is selected to the MyScreen Lock item ( 43). · This function cannot be selected when the ON is selected to the MyScreen PASSWORD item in the SECURITY menu ( 61). · This item cannot be selected for an HDMI signal. MyScreen (continued on next page) 42 SCREEN menu Item Description Using the / cursor buttons turns on/off the MyScreen lock function. ON OFF When the ON is selected, the item MyScreen is locked. Use this function for protecting the current MyScreen. · This function cannot be selected when the ON is selected to the MyScreen PASSWORD item in the SECURITY menu ( 61). Using the / cursor buttons turns on/off the message function. ON OFF When the ON is selected, the following message function works. "AUTO IN PROGRESS" while automatically adjusting "NO INPUT IS DETECTED" "SYNC IS OUT OF RANGE" "INVALID SCAN FREQ. " "NOT AVAILABLE" "Searching. . . . " while searching for the input "Detecting. . . . " while an input signal is detected The indication of the input signal displayed by changing The indication of the aspect ratio displayed by changing The indication of the PICTURE MODE displayed by changing The indication of the MY MEMORY displayed by changing The indication of "FREEZE" and "II" while freezing the screen by pressing the FREEZE button. The indication of the TEMPLATE displayed by changing. · When the OFF is selected, please remember if the picture is frozen. Do not mistake freezing for a malfunction ( 24). MyScreen Lock MESSAGE (continued on next page) 43 SCREEN menu Item Description Each input port for this projector can have a name applied to it. (1) Use the / cursor buttons on the SCREEN menu to select the SOURCE NAME and press the cursor (or the ENTER) button. (2) Use the / cursor buttons on the SOURCE NAME menu to select the port to be named and press the cursor button. Right side of the menu is blank until a name is specified. The SOURCE NAME dialog will be displayed. (3) The current name will be displayed on the first line. Use the /// cursor buttons and the ENTER (or the INPUT) button to select and enter characters. To erase 1 character at one time, press the RESET (or press the cursor and the INPUT buttons at the same time) button. Also if you move the cursor to the DELETE or the ALL CLEAR on screen and press the ENTER (or the INPUT) button, 1 character or all characters will be erased. [. . . ] If the projector is in the standby state, please press the STANDBY/ON button on the projector or the remote control to turn on the lamp. If the POWER, TEMP, LAMP indicators on the control panel of the projector represent some errors (such as temperature error, lamp error), take countermeasures referring to the table on page 73 and 74 and then turn on the lamp. Security features are activated and the projector is locked. Image data for display is not stored in the projector. [. . . ]